Used 2 tons of stainless steel stirred tank mixing tank supply • Used Used Price @ Liangshan quality stainless steel mixing tank, used two tons of stainless steel stirred tank mixing tank supply • Used Used Price @ Liangshan quality stainless steel mixing tank.
Shandong used stainless steel mixing tank also known as the water phase tank, widely used in paints, pharmaceuticals, building materials, chemicals, pigments, resins, food, research and other industries. The device can be carbon steel, stainless steel and other materials produced according to process requirements of consumer products , as well as a heating and cooling devices to meet different process and production needs. heating in the form of a jacket electric heating coil heating, the device structure design, advanced technology, durable, and has a simple, easy to use features It is ideal for less investment, faster production, high-yield chemical equipment.
Shandong used stainless steel mixing tank from the stirring tank, stirring lid, stirrer, bearing, gear, shaft seals and other components, but also according to the process required to configure a heating device or a cooling device. Shandong Shandong Used Used Used Shandong Shandong used stainless steel mixing and stirred tank lid sealing flange coupling can be coupled or welded stirred tank lid can be moved into the material with stirring according to process requirements, the material was observed, temperature, pressure, steam distillation, and other process safety vent tube hole Shandong Shandong Used Used Used Shandong Shandong used stainless steel mixing the upper lid is equipped with gear (motor or reducer), driven by a shaft stirred tank agitator shaft sealing device can be mechanical seal or packing, labyrinth seals, etc. forms (according to user needs to determine). Configurable paddle agitator, anchor type, frame type, spiral type and other forms.
Heating means or cooling means
Generally use the unit according to whether the material is heated or drying or cooling may be. In the custom range, the temperature should be less 230 ℃, working pressure is lower than 0.1Mpa. Heating unit according to the production conditions of use may be. Heating hot . oil medium circulation and direct electrical heating of two hot oil circulating medium is heated HTF configured in another tank heated to a certain temperature, conveyed through the heat pump cycle; direct electrical heating is installed directly on the jacket heating tube, so that thermal oil is heated to the desired temperature (the temperature can be adjusted according to actual situation). Cooling water circulating in the jacket is the use of internal and external circulation, so that the material at a certain temperature no caking or stickiness.
Edit this paragraph Shandong Used Used Shandong Shandong Shandong used stainless steel mixing tanks Used equipment installation, commissioning
1. Check whether there is equipment in the transport fastener serious injury and serious distortion of place, and to check whether there is loose equipment and so on. 2, using anchor bolts embedded manner, on the basis of a solid device horizontal mounting. 3, under the guidance of professionals for proper installation equipment, electrical control devices and accessories, and check the pipe is smooth, the installation of the instrument is correct, whether there is damage to the phenomenon. Check the internal and external equipment before starting the device and surrounding whether it will affect the normal operation of the device is the presence of people or objects, to avoid danger. 4, after installation, first test run conducted a few seconds to determine no electrical short-circuit or no abnormal sound, before for a short time test switch. 5, if stirred tank equipped with a mechanical seal, before the host starts its mechanical seal lubrication tank must inject the right amount of 10 # or sewing machine oil, the mechanical seal cooling chamber must pass into the cooling water, so that the mechanical seal device get good lubrication and cooling. mechanical seals at the factory is not adjusted after installation in accordance with installation instructions to the best position to adjust the mechanical seal, before normal operation (according to user needs). 6, in the normal operation of the device, please Check the bearing temperature, running smoothness, sealing, etc., as well as instrumentation is normal, only after confirming normal feeding operation.