[Auto Accessories] - [Car Electronics] - [GPS]

GPS Tracker, GPS positioning, GPS tracking, Lygps

GPS Tracker, GPS positioning, GPS tracking, Lygps
  • GPS Tracker, GPS positioning, GPS tracking, Lygps
  • GPS Tracker, GPS positioning, GPS tracking, Lygps
  • GPS Tracker, GPS positioning, GPS tracking, Lygps
  • GPS Tracker, GPS positioning, GPS tracking, Lygps
Product code: 19446800001
Unit price: 680 CNY  (98.76 USD)
Price unit:
Minimum order: 10
Other info: Silver
Visit my shop

1 Introduction

This product is based on GSM / GPRS network and GPS satellite positioning system, short messaging, or remote target by mutual contact locate or monitor with a mileage statistics, ACC detection, power failure alarm function, compatible with the original vehicle anti-theft devices: car alarm After the alarm equipment is also alarm, notify the owner via SMS.

2 Applications

l car rental / small fleet management.

l global satellite positioning; vehicle location query; real-time monitoring; timing tracking

l remote control off the oil off track crime

l command vehicles in various industries, scheduling system.

3 Hardware Description

4 Specification

content

specification

size

85mmx 63mmx 18mm (3.3 '* 2.5' * 0.71 ')

net weight

160g

The internet

GSM / GPRS / GPS

Network band

900/1800 / 1900Mhz (850 Mhz Optional)

chip

SIRF3 chip

GPS Module

Simcom900

GPS Sensitivity

-159dBm

GPS positioning accuracy

3-30 Meter

Data transmission

SMS, GPRS (CMNET)

Location query

Phone or platform

Operating Voltage

DC9V-30V

spare battery

3.7V 110mAh

Standby Current

(50mA

Storage temperature

-40 ° C to + 85 ° C

Operating temperature

-20 ° C to + 70 ° C

Operating relative humidity

5% -95% RH

5 Description

Place 5.1SIM card

Be sure to confirm SIM Card call display and no call transfer and PIN Code is disabled. SMS must be in plain text format , Does not recognize PDU format

5.1.1 The SIM card into the deck inside.

5.1.2 The cartridge is inserted locator host.

5.2 positioner mounting

GPS / GSM / GPRS Installation of car owned by a local service center needs professional maintenance technician responsible without the company's permission, users can not disassembly or repair, or peril.

5.2.1 Connecting the terminal box

5.2.2 Installing GPS locators

Installation Buju: (The following operations are under terminal without electricity, otherwise will be dangerous)

Terminal off the oil line: Yellow wire to connect to the relay 86 foot, 85 Pin connected 12V DC bottle positive. 87 Foot and 30 Foot tandem oil circuit.

Emergency trigger the alarm circuit : Blue line contact an alarm button positive, black wire to the car battery negative.

Terminal power line : White wire to relay 86 foot , 85 Pin connected 12V DC bottle positive, 87 feet and 30 feet in series power supply circuit.

Terminal power lines: Red wire to car 12V DC bottle positive, black negative line contact an alarm button.

5.3 Startup

5.3.1 The device connected to the car, and then the SIM Card into the device until the red light is on. The first time you use a satellite signal to outdoor areas.

5.3.2 in 10 To 40 Seconds, the device will search to GSM and GPS Signal and begins normal operation, the state of the device under normal blue lights every 2 Blinks once (blue light stays lit, GPS Module at work; but not locate; blue light has been lit; indicates GPS Module work, and has been positioned to . Fast flashing red lights indicate that the terminal device is communicating.)

5.3.3 When the device receives GPS After the signal is normal, you can use it and an instruction in any setting.

5.4 administrator number

5.4.1 Set the administrator number: Send SMS administrator + password' To the device in number, reply to set the administrator successful example: Instruction: Administrator 123456 (Initial password: 123456)

5.4.2 Remove the administrator number: Send SMS command to delete the number + Password + space + administrator number ' To the device in number, reply to the administrator to be deleted, for example: Administrator number is 13813813800, instruction: delete the number 123456 13813813800' (The default password is: 123456), after you remove the administrator number, device status changes from the administrator no administrator.

Note: The device has two operating modes, one is administrator mode, the other is non-Administrator mode device to factory settings without administrator mode in administrator mode there.. Only authorized number can only be set to operate the equipment (Please refer to the user manual authorization number 5.5). In the absence of administrator mode, all numbers are set up to operate on.

5.5 Authorization Number

5.5.1 Add an authorization number without administrator status: Using a mobile phone dial equipment in the number, this number is recorded after turning on the equipment down automatically added as an authorized number. (Can record up to four numbers, the first five numbers will overwrite the first one number.)

5.5.2 Add authorization number has administrator status: Send SMS commands with the administrator number 'Add number + password + space + number' to the device in the numbers, Reply to 'add numbers success' for example: To add 13813813801 as an authorized number, the instruction: Add number 123456 13813813801 (only administrators numbers can be operated)

5.5.3 Remove authorization number without administrator status: (See Instruction Manual 5.5.1)

5.5.4 Remove authorization number has administrator status: SMS command sent by the administrator number Delete number + password + space + number to the device in the numbers, Reply to 'delete numbers success' for example: To delete 13813813801 authorization number, the instruction: Delete number 123456 13813813801 (only administrator numbers can Send SMS.)

Password Manager 5.6

5.5.1 change Password: Send SMS commands to modify password + old password + space + new password to the device in the numbers, Reply to 'change the password success' for example: 888888 is new password modify instruction: Change Password 123,456,888,888.

5.5.2 restore the initial password: Send SMS Restore the initial password ' To the device in number, reply 'password is 123456'.

Note: There are administrators in the state, only the administrator numbers can send SMS commands, in the absence of an administrator state, all numbers can send SMS commands.

5.7 Mobile Positioning

5.7.1 Mobile Get latitude and longitude: Send SMS to mobile positioning device in number, reply to the following

NOTE: Whether the device is shaped costumes administrator or no administrator under state, any number can send this message instructions.

5.7.3 obtain the location of a mobile phone device: Send SMS Get position ' To the device in number, reply to the location of the device.

Note: To support this feature, depending on the platform.

5.8 Platform Targeting

5.8.1 Equipment in the number of binding platform: Send SMS device number + equipment in the number to the device in number, reply 'Device number is' example: the equipment inside 13813813803 binding platform, the command: device number 13813813803 Reply to 'device number is 13813813803'.

5.8.2 Setting the IP address and port: Send SMS instruction address + IP address + port + port number to the device in the numbers, Reply to 'set the IP address and port of success' for example:. IP addresses 119.147.23.100 port 2332 ,instruction: address 119.147.23.100 port 2332 .

Note: Set the platform number, with the binding platform, to be valid according to the specific platform.

5.8.3 continuous positioning platform:

Set continuous positioning platform: Send SMS positioning interval number + * + * + to the device in the numbers, Reply to 'set up automatic positioning successful example: 30 seconds pass a platform; a total mass 60 times; the instruction: positioning interval 30 frequency 60 .

NOTE: Positioning interval must be greater than 30 Sec; To send unlimited; frequency is set to 0 .

Cancellation continuous positioning platform: Send SMS to cancel the positioning device in number, reply 'Cancel successful positioning.

Note: This feature can be realized through the platform, to support this feature, depending on the platform.

5.8.4 ACC status:

ACC Open state: Development Send SMS commands ACC Development interval + interval to send the device in number, reply 'set ACC to develop transmission interval success' for example: 30 seconds to transfer a data platform, the command: ACC Development interval to send 30'

ACC Off state: Hair ACC off sending SMS commands sent to the device interval interval + in number, reply 'set ACC OFF transmission interval success' for example: 60 seconds to transfer a data platform, the command: ACC Development interval to send 60'

5.9 Remote control oil and circuit

5.9.1 passage control

Disconnect the oil: Send SMS off oil + password , Reply to 'off oil success', and disconnect the vehicle's passage.

Recovery passage: Send SMS password oil + , Reply to 'oil success', and recover the oil vehicle.

5.9.2 circuit control

OFF circuit: Send SMS off + password , Reply to 'power success', and disconnect the vehicle's passage.

Recovery circuit: Send SMS powered + password , Reply to 'power success', and recovery of the vehicle passage.

NOTE: The remote control oil road and circuit, in a state administrator, only the authorized number can be set to send SMS commands, in the absence of an administrator state, all numbers can send SMS commands.

5.10 Remote monitoring

Dial equipment in the number you can listen .

Any listener: Send SMS to any listening devices in the numbers, Reply to 'set any monitor success', all the numbers are monitored. Device default to this mode.

Limit monitoring: Send SMS limit listening to the device in the numbers, Reply to 'set limits monitor success', authorization number can listen.

Close monitoring: Close listeners send SMS commands to the device in number, reply 'off monitor success', all the numbers are not listening.

5.11 electronic fence

And positioning platform bindings use.

5.12 motion alarm

5.12.1 Set motion alarm: Send SMS ' Motion alarm ' To the device in the numbers, Reply to 'set the motion alarm success'. When starting this function, when the vehicle movement will send a text message 'motion alarm + longitude + latitude + speed + time + date' to set this feature phones on, suggesting that the vehicle has been moved up. This function must have a valid GPS signal in time.

5.12.2 Cancel the motion alarm: Send SMS Cancel the motion alarm ' To the device in number, reply 'Cancel the motion alarm success'.

Note: There are administrators in the state, only the authorized number can be set to send SMS commands, in the absence of an administrator state, all numbers can send SMS commands.

5.13 speed alarm

5.13.1 Set motion alarm: Send SMS Speed ​​alarm + speed ' To the device in the numbers, Reply to 'set speed alarm success'. When starting this function, the speed of the vehicle velocity exceeds the set time, it will send a message 'speed alarm + longitude + latitude + speed + Time + Date' Set this function to the phone, suggesting that the vehicle has been speeding up. This function must have a valid GPS signal in time.

5.13.2 Cancel speed alarm: Send SMS Cancel speeding alarm ' To the device in number, reply 'Cancel speeding alarm success'.

Note: There are administrators in the state, only the authorized number can be set to send SMS commands, in the absence of an administrator state, all numbers can send SMS commands.

5.14 Power failure alarm

When the power supply is cut off, the device send SMS alarm: Power alarm + latitude + longitude + speed + Time + Date 'to the administrator number and authorization number.

5.15 emergency alarm

Press and hold tight SOS Push button 3 Second, device sends SMS alarm 'emergency alarm + longitude + latitude + speed + Time + Date' to the administrator number and authorization number

5.16 Mileage statistics

And positioning platform bindings use.

5.17 device reboot

Send SMS Reboot the system + Password ' To the device in number, reply 'system is rebooting' and restart the machine, return to the oil supply state.

6 Precautions

6.1 Please read the instructions carefully before installing the device user.

6. 2 Before installation, please insert the SIM card, SIM card support positioning GPRS network traffic card (opened CMNET, not CMWAP traffic), and make sure the SIM card call display, no call forwarding, no password is set, or the device does not work .

6. 3 The device operating voltage of 9V-30V, please use within the operating voltage range.

6. 4 Please make sure that all equipment and cables connected correctly and then take the mains. Do not install or remove the case on the host power. If there are missing lines or misconnection, please turn off the power, otherwise easily damage the equipment.

6. 5 This device is a wireless communication device, turn off the mains before entering the fuel depot and dangerous places.

6.6 In order to avoid electromagnetic interference or incompatible configurations, posted notices of places stop using the device as required.

6.7 Keep the device in dry environments, humid environment tends to damage the internal circuitry.

6. 8 Please use a dry cloth to clean, do not use chemicals and cleaning agents.

7. Troubleshooting Methods

malfunction

Approach

Unable to start

Please check the power supply is connected.

hang on

Apparatus existence of an authorized number, an unauthorized number dials will not hang up.

Monitor Fail

Check listening.

Location information is all zeros

Please open outdoor equipment.

8. Operation Command Set

Features

SMS content

SMS reply

Remark

1

Set the administrator number

Administrator 123456

Setting Administrator success

The initial password is: 123456

Remove the administrator number

Delete number 123456 13813813800

Administrators are deleted

After you remove the administrator is no administrator

2

Add Authorization Number

Add number 123456 13813813800

Add number Success

This is a state administrator settings; without management status; dial device number is automatically recorded as the authorized number

Remove authorization number

Delete number 123456 13813813800

Delete number Success

3

change Password

Change Password 123 456 888 888

Change Password Success

Initialization code

The initial password recovery

123456

4

Mobile Get latitude and longitude

Mobile Positioning

SMS contains the latitude and longitude information

Get phone location

Get Location

location

Platform Support

5

Binding platform

Equipment Number 13813813803

Equipment number is 13813813803

Setting the IP address and port

Address 119.147.23.100 port 2332

Setting the IP address and port success

6

Set up automatic continuous positioning

Positioning interval 30 times 60

Set up automatic positioning successful

Cancellation continuous positioning move

Cancel Location

Cancel successful positioning

7

ACC open state

ACC Development interval to send 30

Set ACC developed successfully send interval

ACC off state

ACC Development interval to send 60

Set ACC OFF transmission interval success

8

Cut off the oil

Off oil 123456

Off oil success

Recovery passage

Oil 123456

Power Success

9

Cut off the circuit

Off 123456

Off success

Recovery circuit

Power 123456

Power Success

10

Any monitor

Any monitor

Set any monitor success

Dial terminal number to listen

Limit monitor

Limit monitor

Set a limit monitor success

Close monitoring

Close monitoring

Close monitoring success

11

Set motion alarm

Motion alarm

Set motion alarm success

Cancel the motion alarm

Cancel the motion alarm

Cancel the motion alarm success

12

Setting speed alarm

Overspeed alarm 80

Setting speed alarm success

Cancel speed alarm

Cancel speed alarm

Cancel speeding alarm success

13

Power failure alarm

Reply to the administrator number or authorization number on

14

SOS distress

Reply to the administrator number or authorization number on

15

Reboot

Reboot the system 123456

The system is restarted