Three-phase power protection GMR-32B company Shanghai Kun plastic spot 6

Three-phase power protection GMR-32B company Shanghai Kun plastic spot 6
 

Product description:

Details of the three-phase power protection GMR-32B company Shanghai Kun plastic spot 6
  • Brand / model: Three-phase GMR-32B
  • Temperature range: 10DD60 ℃
  • Scope: All
  • Automatic reset function: Automatic
  • Reset Overload Capacity: 10
  • Response time: 1500mss
  • Product Certification: National Quality Center Quality Management System Certification
  • Insulation test: 120Vac / min Vac
  • Breaking capacity: 30kVAkW

Three-phase power protection GMR-32B company Shanghai Kun plastic spot 6

All three-phase procurement timeout data products available from stock
Three-phase power protection, phase sequence protection GMR-32B

Spot
Three-phase power supply phase sequence protection GMR-52B1F
Three-phase power protection
GMR Series multifunction power protection device (also known as three

Phase power monitor; phase sequence protection; over voltage protection

Nursing, etc.) mainly used in AC 50 / 60Hz, rated

Voltage 460V or less, industrial three-phase 220V, 380V.

Various fault detection 440V, 460V and other voltage levels

For three-phase input power supply voltage is too high, overvoltage

Low; phase; inverse phase (phase sequence), three-phase voltage uneven

Heng provide protection, products widely used in air

Presses, motors, power distribution box, water pump, oil pump.

Central air conditioning units; electronic control box; distribution cabinet; lifting

Machine; such as central air conditioning compressor protection; various electrical

Ladder of power monitoring; pump; pump anti-phase; reverse

Phase protection, industrial equipment operating in the maintenance of equipment

The normal operating voltage indispensable protection products.


Three-phase power protection, phase sequence protection
GMR-32B1 GMR-22A GMR-32B GMR-32
GMR-32B3 GMR-32BD GMR-32BL
GMR-32BH GMR-32BT GMR-YK-32B
GMPR-ZT GMPR-IT GMPR-AT
GMPR-ZS GMPR-IS GMPR-AS
GMPR-NT GMPR-NS GMR-52B
Main business:
Mitsubishi full range of products; Panasonic servo; Plouffe

Sri Lanka; HITEC; Yasukawa; Siemens; timeout
Shanghai Kun Plastic Automation System Co., Ltd.
Address: Fengxian District, Building 95, Lane Fengpu
Contact: Mr. Li / 15901631703
Tel: 021-60640260
Contact QQ: 291577518
Fax: 021-61240084
Three-phase power protection, phase sequence protection
ABJ1-12 ABJ1-122 ABJ1-14WFX
ABJ1-10W ABJ1-12W ABJ1-14W
ABJ1-14FY ABJ1-18AY ABJ1-18DY
ABJ1-19AH ABJ1-14CY ABJ1-18AH
ABJ1-14FP ABJ1-14WAX ABJ1-14WBX
About ABJ1 series three-phase AC protection relay

Electric is the company's development and production of micro-products.

Depending on the model protection functions: Overvoltage protection

Protection. Undervoltage protection phase sequence protection dynamic off-phase protection

Support static phase protection. Voltage unbalance protection .X

Type have delay protection (Delay time is not more than 3

Seconds) The design principle of the protection relay novel Performance

Reliable; anti-voltage fluctuation ability; easy wiring installation

Reliable, fault display clarity.
The following is a (ABJ1-10W, ABJ1-12W.

ABJ1-14WFX ABJ1-14WBX, ABJ1-14FY.

ABJ1-18DY ABJ1-18AY, ABJ1-19AH.

ABJ1-122)
Product ~~
• ═━10W
ABJ1-10W is my factory developed the production of three-phase

Micro product features protection relay: Wrong phase protection

Power supply rated voltage protection: 380VAC response

Room: 1S rated working voltage: 240VAC, 24VDC

Rated working current: 1A (AC-14, DC-13)

• ═━12W
ABJ1-12W is my factory developed the production of three-phase

Micro product features protection relay: Wrong phase protection

Protection; dynamic off-phase; static phase; voltage imbalance

Working power rated voltage: 380VAC voltage uneven

Heng rate setting: 8% Response Time: 2S rated working

Voltage: 240VAC, 24VDC rated current:

1A (AC-14, DC-13)

• ═━14WFX
ABJ1-14WFX is my factory developed the production of three

Micro-phase AC protection relay Product Features: Dynamic

Off-phase, static phase, voltage unbalance, phase error.

Overvoltage; under voltage protection; Working power rated

Pressure: 380VAC voltage unbalance rate setting: 8% over

Voltage: 428VAC undervoltage: 332VAC response

Room: 3S rated working voltage: 240VAC, 24VDC

Rated working current: 1A (AC-14, DC-13)

• ═━14WBX
ABJ1-14WBX is my factory developed the production of three

Micro-phase AC protection relay
Product Features: Dynamic off-phase; static phase; voltage

Unbalance, phase error, overvoltage, undervoltage protection.

Working power rated voltage: 380VAC voltage uneven

Heng rate setting: 8% over voltage: 437VAC undervoltage

: 323VAC protection delay: 3S rated working voltage

: 240VAC, 24VDC rated current: 1A

(AC-14, DC-13)

• ═━14FY
ABJ1-14FY I developed the production plant with a load

Protection of three-phase protection relays A, B

, C function: dynamic off-phase; static phase; voltage

Unbalance, phase error, overvoltage, undervoltage protection. Working

Power rated voltage: 380VAC voltage unbalance rate

Setting: 8% over setting: 428VAC undervoltage

Protection settings: 332VAC response time: 5S recovery

Delay: 5Min form of electric shock: 2C rated working power

Pressure (contact): 240VAC, 24VDC rated work

Current (contact): 1A (AC-14, DC-13)

• ═━18DY
ABJ1-18DY I developed the production plant with a load

Protected adjustable three-phase AC protection relay capacity

Product. The model has two sets of phase failure and voltage unbalance monitoring

Detecting sensor for AC contactor monitoring contacts

This monitoring mode is the company's unique patent

Products. ABJ1-18DY models have been applied to Dalian

Refrigeration Co., Ltd. and Wuhan McQuay Air

Tune Refrigeration Co., Ltd., compressor protection control system

More than five years; no failure; with good reliability

Monitoring overall and many other advantages. A, B, C function

: Dynamic off-phase, static phase, voltage unbalance.

Phase error, overvoltage, undervoltage protection. A, b, c function

: Dynamic off-phase; static phase; voltage imbalance protection

Power supply rated voltage protection:. 380VAC voltage

Unbalance rate setting: 8% over setting:

420VAC voltage protection settings: 340VAC response

Room: 5S recovery delay: 5Min rated working voltage

(Contact): 240VAC, 24VDC nominal operating power

Flow (contact): 1A (AC-14, DC-13)

• ═━18AH
ABJ1-18AY I developed the production plant with a load

Protection of three-phase protection relays A, B

, C function: dynamic off-phase; static phase; voltage

Unbalance, phase error, overvoltage, undervoltage protection. A.

b, c function: Dynamic off-phase; static phase; voltage

Unbalance protection rated voltage:. 380VAC work

Voltage: 380VAC ± 20% voltage unbalance rate setting

: 8% over setting: 420VAC voltage protection

Setting: 340VAC protection delay: 5S-phase protection

Delay: 1S recovery delay: 5Min rated operating voltage

Pressure (contact): 240VAC, 24VDC rated work

Current (contact): 1A (AC-14, DC-13)

• ═━19AH
ABJ1-19AH phase AC detector is my plant since

Primary research and production with load protection phase AC monitoring

And protection relays A; B; C function: Dynamic

Off-phase, static phase, voltage unbalance, phase error.

Overvoltage, undervoltage monitoring a, b, c function: Dynamic

Off-phase, static phase, voltage unbalance monitoring.

Ambient temperature: -25oC ~ + 55oC Relative Humidity:

(90% of rated voltage: 380VAC ± 20%

50 ~ 60HZ voltage unbalance rate setting: (8% overpressure

Protection settings: 420VAC voltage protection settings:

340VAC protection delay: 5S ± 20% recovery delay

: 5Min ± 20% rated voltage (contact):

250VAC, 28VDC rated current (contact)

: 1A (AC-14, DC-13)

• ═━122
ABJ1-122 I developed the production plant with a load

Protection of three-phase protection relays A, B

, C function: dynamic off-phase; static phase; voltage

Uneven, wrong phase power supply rated voltage protection:

380VAC voltage unbalance rate setting: 8% Response time

Room: 2S form of electric shock: 2C rated working voltage (

Contact): 240VAC, 24VDC rated current

(Contact): 1A (AC-14, DC-13)

This product complies with GB14085.5-2001 eqv

IEC60947-1: 1999 standard.

Warning! This product generally is a three-phase power supply

Side sampling, shall be installed at the output side of the inverter current

!
First, the structural characteristics
1) Installation: The base is made of rail protector

Style; equipped with two M4 screw structure; direct and independent security

Loading or HT35 rail mounting.
2) indicator: with five LEDs to indicate, respectively,

: Normal, phase (voltage phase imbalance), inverse

Phase, overvoltage, undervoltage.
3) Dimensions: 68mm * 30mm * 76mm.

Second, the protection features
1) Phase protection: Refers to the protection circuit in the running state

When the state or non-operating state, the occurrence of any one phase open phase

Failure, delay 2S action.
2) Reverse phase protection: Prevent L1; L2; L3 three phase

A protective measure flow phase sequence is wrong, the delay 2S move

Make.
3) Voltage unbalance protection: Refers to the three-phase voltage uneven

A balanced protection measures will affect the safe operation of the line

Shi, phase unbalance ratio = time * 100%) 10%.

Protection delay 2S action.
4) Overvoltage Protection: Refers to the protection circuit voltage is higher than

Setpoint; delay 3 ~ 8S action; recovery hysteresis is

6 ~ 20VAC.
5) Undervoltage protection: Refers to the protection circuit voltage is lower than

Setpoint; delay 3 ~ 8S action; recovery hysteresis is

3 ~ 20VAC.

Third, the main technical data
1) Main circuit:
Rated voltage: 220VAC, 380VAC, 440VAC.

460VAC.

2) Connect the wires of the main circuit: insulated copper wire which contained

An area of ​​1.0 ~ 2.5mm. If the single strand copper wire can be directly inserted

The terminal; the use of cord, you must wire

Plus needle lugs to ensure reliable connection.

2 auxiliary circuit:
1) has an electrical inseparable one normally open and one normally closed

Contact 2) Use category: AC15, DC13
3) Contact capacity: 250VAC 2.5A, 30VDC

1.5A
4) Conventional thermal current: 5A

CE certification
I produced ABJ1-12W, ABJ1-14W model

Products are technologically advanced and price advantage, in 2003 on

Into the international market; marketing European Union; Middle East and Southeast

Asia.

System Certification
I produced ABJ1 series and ABJ1-W series are

National Quality Center Quality Management System Certification

certificate


share to: