TH3318 Additive Package for Dual Fuel Engine Oil

TH3318 Additive Package for Dual Fuel Engine Oil
 

Product description:

Description
TH3318 is formulated with a variety of additives such as superior detergent, dispersant, antioxidate/ corrosion inhibitor, etc. The oil prepared from TH3318 possesses the properties of low ash, fine dispersibility and antioxidation, applicable to natural gas engine as well as gasoline engine.

Applications
API grade
Treating rate (m%)
Mono-grade
Multi-grade
SF
6.0
6.8
SE
4.5
5.0
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/ 30, 15W/ 40 internal combustion engine oils blended with Group Ⅰ and Group Ⅱ base oil, and the quality complies with API standard.

Characteristics
Item
Typical value
Test method
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
170
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
78
ASTM D445
Total base number, mgKOH/ g
73
ASTM D2896
Sulfate ash, mass%
8.9
ASTM D874
Calcium, mass%
1.62
ASTM D4927
Nitrogen, mass%
0.95
GB/ T3228
Phosphorus, mass%
1.51
ASTM D1091
Zinc, mass%
1.79
ASTM D4927
Mechanical impurities, mass%
0.09
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.