[Tools & Equipment] - [Power Tools] - [Power Tool Accessories]

Hot melt glue gun | 80W hot glue gun

Hot melt glue gun | 80W hot glue gun
  • Hot melt glue gun | 80W hot glue gun
Product code: 19103900001
Unit price: 31 CNY  (4.51 USD)
Price unit: Per piece
Minimum order:
Other info: 32KG
Visit my shop

Features
A. Rapid heating, and energized for 5 minutes
Two. Automatic thermostat design, for EVA pine December synthetic rubber, Synthetic rubber strips and a variety of low melting point of polyethylene plastic resin strip, adjust the desired temperature, the proper control of the melt viscosity.
3. Quick to heat up. Which means that heat. Continuous work on the production line will not reduce the temperature.
4. Energy efficient thermostats work; melt glue gun; power consumption reduced by 50%

5 Melt glue gun is the use of integrated control the heating element, long life and durable.
6. Barrel design is relatively light. Long-term use will not fatigue.
7 one-hand operation, very precise control of the output of the melt.
8. Improve the working environment, reduce labor intensity and improve working efficiency.
Security
A. Anti-overheating design near the heating element; temperature fuse; to prevent a high degree of overheating
Two. Double insulation. Electric strength of up to 3750V insulation resistance greater than 100M Europe
3. Barrel is compact and sturdy. Heat shock plastic manufacturing
4. Does not contain any organic solvents. Not cause environmental pollution
The main purpose
EVA rosin synthetic rubber strips, synthetic rubber strips of polyethylene plastic resin and a variety of low-melting-point strip
Paste card cartons, corrugated boxes and other
Solid wood
Solid plastic and metal
Solid glass and ceramic products
Solid textiles and shockproof packaging material
Packaging system for port
Specification


Model
SD-860
SD-866


Power
220V-50HZ
220V 50HZ 110W


Temperature
High temperature
110-220 / ℃


Strip category
Softening point 40-80 ℃

Melting temperature of 100-220 ℃

(The above data are for reference only)
Softening point 40-80 ℃

Melting temperature of 100-220 ℃

(The above data are for reference only)




Recommended temperature


Tape types
Set temperature

EVA white strips
160 ℃

EVA rosin syntheic bar
130 ℃

Synthetic rubber strips of polyethylene plastic resin
100 ℃



Use

A. Will tape sent by the end of the melt glue gun directly into the nozzle
Two. Pull the trigger you can precisely control the output of the melt
3. Warm up for five minutes can be used normally after power


Note
The use of a melt glue gun should be checked before voltage are consistent with

2 should be selected with a marked temperature melt adhesive tape, adjust the temperature of the melt glue gun and melt tape temperature before the corresponding

3 recommendations melting strips diameter of 10.8 to 11.5 mm, other size melt adhesive tape, may be down caused by the reflux to avoid melting plastic strips used for a long storage

4 yellow tape has a strong suction temperature; attention kept under seal; should soon be opened; if the moisture absorption of the yellow tape; may lead to the failure of the melt glue gun

5 melt glue gun work; melt glue may cause the nozzle temperature of 100 ° C above; very hot; please do not let the human body with the mean close to

6 sol gun should be kept dry in a humid environment to avoid very high or very low temperature place melt glue gun

7 melt glue gun without any percussion, dismantle and installation of other electric parts parts

8 new melt gun for the first time, the heating of the heating element may be a slight smoke, which is a normal phenomenon disappear automatically after ten minutes.

The work of the 9-melt glue gun; adhesive thermal expansion of the nozzle there will be a small amount of glue out; this is a normal phenomenon

10 is too high melt temperature may cause the glue gun nozzle leakage glue; such as melt glue gun nozzle leakage of plastic; may be appropriate to adjust the temperature of the melt glue gun to avoid leakage of glue

11 melt glue gun to use to keep the muzzle downward or horizontal direction to avoid the muzzle up, causing the adhesive back in failure

12 melt glue gun at intervals over 10 minutes to re-use; the nozzle will appear adhesives stagnation flow; which is a normal phenomenon; quickly tap the trigger until the adhesive smooth outflow until

13 melt glue gun to suspend the work of more than 20 minutes; to cut off the power to prevent long power space heating; resulting in the glue gun to glue the back of accidents caused by

14 melt glue gun use should be based on formal release

Condition: Brand new

Size: 19cm X 16cm X 3cm

Weight: 0.33 Kg

Material: Heat resistant plastic

Colour: as picture

SKU: 901959-A01-14-06

Notice:. Color of pictures may varies by different monitor setting All pictures are real stock photos.

Special Features
1. rapid heating, electricity use 5 minutes
2. Automatic thermostat designed for EVA pine wax synthetic rubber strips, synthetic rubber, polyethylene plastic resin strip bars and all kinds of low melting point, adjust the required temperature, can properly control the viscosity of the melt.
3. The rapid warming. That means that the heat working continuously on the production line will not reduce the temperature.
4. Energy efficient thermostats work, melt glue gun so that power consumption reduced by 50%

5. melt glue gun control with integrated heating element, long life and durability.
6. Barrel design is relatively light. Long-term use will not fatigue.
7. Single-handed operation, can be very precise control of melt output.
8. improve the working environment, reduce labor intensity and improve work efficiency.
Safety
1. designed to prevent overheating; the heating element in the vicinity with a temperature fuse; to prevent overheating height
2. Double insulation electrical strength of up to 3750V, insulation resistance greater than 100M Europe
3. Barrel compact, rugged use heat-shock plastic manufacturing
4 does not contain any organic solvent. Not cause environmental pollution
The main purpose
EVA rosin synthetic rubber strips, synthetic rubber, polyethylene plastic resin strip bars and all kinds of low melting point
Paste card cartons, corrugated boxes, etc.
Solid wood
Solid plastic and metal
Solid glass and ceramics
Textiles and shockproof packaging materials firm
Packaging system port
specification


model
SD-860
SD-866


power
220V-50HZ
220V 50HZ 110W


temperature
High temperature
110-220/ ℃


Use tape category
Softening point 40-80 ℃

The melting temperature of 100-220 ℃

(The above data for reference only)
Softening point 40-80 ℃

The melting temperature of 100-220 ℃

(The above data for reference only)


Recommended temperature


Strip Category
set temperature

EVA white tape
160℃

EVA rosin synthetic rubber strips
130℃

Polyethylene plastic resin synthetic rubber strip
100℃


Instructions

1. Place the strip by the melt glue gun to the nozzle directly into the tail
2. Pull the trigger can be precisely controlled melt output
3. Preheat five minutes after power on and working properly

Precautions
1 Before melt glue gun use should check the voltage is consistent

2 should be selected with a melting temperature marking tape, adjust the temperature of the melt glue gun and melt tape temperature before the corresponding

3 recommendations melting strips using a diameter of 10.8 to 11.5 mm, if the strip of melting glue other dimensions may pour cause reflux, avoid the use of long storage of molten plastic tape

4 yellow tape has a strong suction temperature; note sealed; soon after opening should use; if the moisture absorption of yellow tape; may cause malfunction melt glue gun

5 melt glue gun work; melt adhesive may cause the nozzle temperature reaches above 100 ℃; very hot; do not let the body with the mean close

6 sol gun should be kept dry; not to be used in humid environments; avoid using melt glue gun in very hot or very cold places

7 melt glue gun is not working any percussion, to dismantle some of the parts and installation of other electric

8 new melt gun for the first time; because the electric heating element which may slight smoke; this is a normal phenomenon; disappear automatically after ten minutes

9 melt glue gun work; due to thermal expansion of the adhesive causes; there will be a small amount of glue nozzle out; this is a normal phenomenon

10 high melt temperature may cause the glue gun nozzle leakage glue; if found melt glue gun nozzle leakage glue when; melt glue gun can be properly adjusted temperature; avoid leakage of glue

11 melt glue gun use to keep the muzzle downward or horizontal direction; avoid the muzzle up; cause adhesive back fails

12 melt glue gun at intervals over 10 minutes to re-use; glue nozzle stagnant situation will appear; this is a normal phenomenon; just quickly tap the trigger; up until the adhesive smooth outflow

13 melt glue gun to suspend the work of more than 20 minutes time; to cut off power supply; prevent long power space heating state; glue gun glue cause backflow caused by accident

Should according to the formal release 14 melt glue gun use

Condition: New

Dimensions: 19 cm X 16 X 3 厘米 厘米

Weight: 0.33 kg

Material: heat-resistant plastic

Color: As pictures

SKU: 901959-A01-14-06

Note: Due to different monitor settings may result in color, but all the pictures are from in-kind shooting, please rest assured purchase.