We recommend that you use the product first scrap with the transfer film to pick the next corner wall stick performance test to determine the powder can not afford, do not take off, no effect after the paste. Through our many experiments and a lot of customer feedback shows that the majority can After normal use. Usually the newly renovated walls need to wait 2-3 months to use, please test before use is still attached. As a result of wall paint off the wall as a result of operational errors or damage, shall not be liable
Scissors; blade; bank cards; transfer film, etc.
Wall Stickers simple operation to identify the designated location posted, and suggested that two people with the following manner and try to complete a one-time pasting:
1, the first part of the outer pattern of extra white space cropped, relatively easy to paste;
2, the transfer film removed after the end of paper pasted on the pattern, if not completely stick to the transfer film, you can pick off with a blade auxiliary. Then bank card scraping back and forth on the transfer film several times, so that patterns with transfer film better The sticking together;
3, the pattern attached to the specified location, and extruded from the corner of his hand Calibrating bubbles, where even the hand-patterned pressed smooth (Attachment: first transfer film can be fixed to the wall at the corner of paste; then. slowly downward direction along the transfer film on the wall; then bank cards by the middle of the pattern repeated around the direction of scraping a few; and enable better stick to the wall pattern);
4, when the transfer film to tear away from the wall, the hand according to pattern, parallel to the wall from the corner as far as possible, try to slow, do not tear off the pattern associated (Note: the transfer film can be used repeatedly).
5, and you're done! Monotonous walls had once filled with fashionable.
1, before the operation, it is recommended that you cut off part of the corner transfer film line and select the foot of a wall under the wall performance test, if the wall easily glue the powder transfer film can be stuck in the towel a few more to weaken the viscosity also I recommend that you try to blank the transfer film cut to avoid excess part of the damage the wall. Of course, the excess part of the photo can also be cold laminating.
2, this product can be pasted on walls, glass, tiles, switches and other places. If not enough detailed instructions, please see the graphic tutorial again, be sure to understand clearly before you start. To avoid affecting the proposal as not to tear off the wall. If you want Take tear, can make use of hair dryer can be stripped while blowing edge tear, tear the wall next to the hand as much as possible.
3, we try to design care unit into a format, which is more convenient to paste. Also recommend that you cut into small pieces and effect diagram referring to paste separated because there is no smooth and bubbles when posted larger pattern, breaking the bubble with a needle available hand heal.
4, due to the light, color, computer and other reasons, the physical effects of product pictures may go astray, the specific color please prevail in kind Products.
By material impact, width and height as more than one meter is required stitching, please refer to the specific effect of pictures to paste.
Dimensions: 60 cm X 67 X 0.1 厘米 厘米
Weight: 0.32 kg
Color: Red + Black
Note: Due to different monitor settings may result in color, but all the pictures are from in-kind shooting, please rest assured purchase.