MG shadow JYC Pro1-D DMC Ultra-thin multilayer coating with a digital camera CPL polarizing filter
JYC PRO1-D series digital cameras special filters are designed for the latest digital camera design and development of new products. The series can be used for wide-angle lens, thin frame filter frame using the latest design, such as contact lenses and lens easily, PRO1-D series filter light phenomenon mirror image sensor for digital cameras prone to reflecting light, designed to minimize the specular reflection light filters into the lens, in the process using the latest digital multi-coated DMC technology, JYC PRO1-D series around the edge of the filter in the filter and subjected to blacken process, the maximum reduction in the specular reflection light, halos, and flares, light transmittance significantly higher than the general filter
DMC: DIGITAL MULTI-COATED (digital multi-coated)
PRO1 Digital UV addition to the general function of the outside mirrors due; most special lens coating is specifically designed for digital cameras and set; PRO1 Digital uses the DMC (Digital Multi Coat), in addition to make a colorless and transparent mirror real, but also effective minus internal reflection between the filter and the lens is like.
Six main performance:
1, DMC, digital multi-coated digital multilayer coated reflective lens filter can be reduced to a minimum, and reducing flare and ghosting.
2, BAF, black aluminum frame. Filter sand surface in black aluminum for the frame, can further reduce the reflected light generated by the frame.
3, BRG, blackened lens edge technology. This is designed to avoid any chance of reflected light from the lens edge.
4, LPF, ultra-thin frame. The latest ultra-thin frame is designed to help the lenses used on the super-wide-angle lens. The lens is difficult to reach and, at the same time can be equipped with the lens cap.
5, KEF, recess framework is easy to use spring locking groove lens Free slip, easy to install and removal.
6, UVC, anti-UV box. Plus UV filter cartridge, to better prevent UV penetration, thus extending the life of the filter.
Function: Increases color contrast filters, strengthen performance of the lens and the screen can show color contrast dark blue sky with clouds layers can prevent reflective glass and the water, suitable for photography with bright reflections on can be reduced. Soft Focus Pan atmospheric fog caused in landscapes, but it does not change the tone balance of the entire screen. Most modern single-lens reflex camera (SLR) have adopted half of reflection polarizing prism (beam metering) system. , CIR-PL is to tie these single-lens camera designed for use.
1, eliminate other reflective objects
2, the elimination of reflective glass mirror / make the sky bluer
3, the elimination of water reflection
4, to eliminate the plant surface reflective
Polarizer using the methods and precautions
Installation polarizer; UV can be screwed directly onto the mirror; if produce vignetting (a phenomenon in the ultra-wide-angle lens is particularly evident; although Jazz Movies JYC thin lenses; however CPL UV plus ultra-thin or have a certain thickness), can The UV remove, then put a spin on the CPL.
Specific regulation polarizer as follows: the polarizer mounted directly on the SLR camera's front lens or ordinary DC; side slowly rotating polarizer adjustment ring; side through the viewfinder (LCD observe ordinary DC must not be observed with an optical viewfinder ) observed the scene being shot in the polarized light source, until it disappears or is weakened to the desired effect so far. If the camera does not have the Ring, you can not install a polarizer, or is only rangefinder that can be placed in front of the polarizer lower side viewfinder while rotating polarizer adjustment ring until the polarization disappear or weaken the expected size, and then adjusting ring orientation remains unchanged (and even if adjusting direction indicated mark on the ring remains unchanged) the premise of the polarizer Pan to set in front of the lens of the camera. After that the camera can not arbitrarily change the shooting orientation, or need to re-adjust the polarization direction of the polarizer