Mixing bucket

Mixing bucket
 

Product description:

Mine mixing bucket Uses:

Jinyang mine Mixing bucket Pulp for flotation before stirring to make pulp and chemical mix, creating the conditions for processing operations.

Mine mixing tube use and maintenance:

1. Power preceded by checking all parts of the mixing bucket bolts are tightened, whether filled with lubricating oil.

2. Stop adding water to clear debris barrel precipitation.

3. The mixing drum can also be used as chemical raw materials mixing ingredients.

Mine Mixing tube Installation and maintenance

Jinyang mine mixing drum machine maintenance is an extremely important regular work, it should work closely with most of the operations and maintenance, etc., should be full-time personnel on duty checks.

A machine maintenance:

1; bearing shoulder the entire load of the machine; so good lubrication of the bearing life of a great relationship; it directly affects the life of the machine and the operation rate; thus requiring injection of oil must be cleaned; seal must be good; stirring barrel The main oiling Office (1) Turn bearing (2) roller bearing (3) all gears (4) activities bearings, sliding plane.

2, the newly installed tire prone to loosening must always be checked.

3, Jinyang mine Mixing bucket Pay attention to whether the various parts of the machine when the power is working properly.

4, pay attention to check the degree of wear parts wear, and pay attention to replacement of worn parts.

5, put the active device chassis plane should avoid activities out dust and other matter bearing on the chassis can not move the machine does not meet the crushed material, so as to cause a serious accident.

6, mixing drum bearing temperature rise, should immediately stop check the reason to eliminate them.

7; rotating gears operate if the impact of sound should immediately stop inspection; and to eliminate

Second installation test:

1, Jinyang mine mixing drum equipment should be installed on a level concrete foundation with anchor bolts.

2, the installation should pay attention to the barrel main body stirred vertical and horizontal.

3. After installation check all parts for loose bolts and host the doors are tight and, if requested to tighten.

4, according to the configuration of power equipment and power line control switch.

5, check is completed, the empty load test, test the normal production.


Mine mixing bucket main technical parameters:

model Simplified diameter
mm
Simplified height
mm
Effective capacity
mm
Impeller diameter
mm
Impeller speed
Rev / min
Dimensions
mm
Equipped with a motor
model power Rotating speed
XB-500 500 500 0.098 200 600 600*566*954 Y90L-6 1.1 940
XB-750 750 750 0.33 255 530 1085*858*1202 Y100L-6 1.5 940
XB-750 750 1000 0.44 255 530 1085*858*1492 Y100L-6 1.5 940
XB-1000 1000 1000 0.58 255 530 1172*1138*1491 Y100L-6 1.5 940
XB-1200 1200 1250 1.4 400 340 1354*1310*1742 Y132S-6 3 960
XB-1500 1500 1500 8.2 400 320 1656*1572*2171 Y132S-6 3 960
XB-2000 2000 2000 5.6 550 290 2380*2162*2850 Y132M2-6 5.5 960
XB-2500 2500 2500 11.2 650 280 3036*2716*3543 Y180M-4 18.5 735
XB-3000 3000 3000 19.1 700 210 3604*3216*4250 Y180M-4 18.5 735
XB-3550 3550 3550 30 850 230 3940*3766*5386 Y225M-8 22 730
TSO-750 750 1000 0.44 250 674 1085*958*1492 Y100L2-4 3 1420
TSO-1200 1200 1200 1.4 400 400 Y132S-4 5.5 1440
TSO-1500 1500 1500 2.2 410 400-440 2060*1620*2330 Y160M-4 11 1460
Zhengzhou Jinyang Machinery Co., Ltd. URL: http: //www.ydqmj.org Wealth Hotline: 15138999183