First, quartz sand dryer Overview:
Quartz sand dryer Widely used in building materials, metallurgy, mineral processing, chemical, cement and other industries, mainly for the slag, limestone, clay, quartz sand, quartz sand, slag and other wet large, than the major materials. Jinyang quartz sand dryer production line, mainly from the rotary cylinder, the wind equipment, high-speed broken up equipment, lifting plate, self-cleaning device, gear, transportation equipment, hot air equipment, gear, support equipment and sealing devices and other components. A full drying equipment designed production of sophisticated, stable performance, advanced technology, high output, low power consumption, small footprint, the degree of mechanization advantages.
Second, quartz sand dryer Application:
Quartz sand dryer Is a lot of material handling drier. As reliable operation, operating flexibility, adaptability, processing capacity, widely used in metallurgy, building materials, food, light industry, chemical, coal, medicine and mining industries. Back around Dryers generally adapted to granular materials, can also be incorporated into the material used for some way to dry and sticky or pasty materials with higher water content. The advantage of this dryer is the production capacity, wide application, flow resistance small, allowing greater volatility in the operating range, easy to operate. quartz sand dryer, drum dryers commonly used in dry sand, ore, coal, chicken manure, cow dung and so on.
Third, the quartz sand dryer works:
Jinyang quartz sand dryer drying wet material from the belt conveyor or bucket elevator to the hopper, then through a hopper into the feed end of the feeder by feeder pipes. Inclination feed conduit is greater than the natural inclination of materials, so that the material smoothly flows into the dryer. dryer cylinder is slightly inclined to the horizontal rotating cylinder. Material from the higher end of the join, the heating medium enters from the low end, into countercurrent contact with the material, but also the heating medium and the material together and flow into the barrel. With the rotation of the dryer drum material by gravity to run to one end than the end of wet material in the cylinder body to move forward the process, directly or indirectly, to heat the heating medium, The wet material to be dried and then quartz sand at the discharge end of the dryer by belt conveyor or screw conveyor sent.
In the quartz sand dryer cylinder body wall equipped with copy board, its role is to copy the material up and planted, so that the contact surface of the material and increases airflow to improve the drying rate and to promote material progress. Heat carrier generally divided hot air, flue gas, etc. After the heat carrier through the dryer, the general need to cyclone brought down trapping gas inside the material. To further reduce exhaust gas dust content, but also through the baghouse or wet law and then put dust emissions.
Fourth, quartz sand dryer technical parameters:
| Product Specifications || Production capacity |
(T / h)
| power |
| Speed of bucket |
(R / min)
| Reducer |
| weight |
|Φ0.6*8 m ||1.5-2.8 ||4 ||8 || JZQ 250-16-Ⅰ ||5.1|
|Φ0.8*10 m ||3.0 ||4 ||7.5 || JZQ 350-16-Ⅰ ||6.9|
|Φ10*10 m ||3.3-4.9 ||5.5 ||5.8 || JZQ 400-16-Ⅰ ||7.5|
|Φ1.2*10 m ||4-6 ||7.5 ||4.8 || ZL 50-16-Ⅰ ||13.5|
|Φ1.5*12 m ||4-6 ||10 ||4.8 || JZQ 500-Ⅲ-2F ||18.9|
|Φ1.5*15 m ||7-12 ||18.5 ||4.8 || ZQ 500-Ⅲ-2F ||21|
|Φ1.8*12 m ||7-12 ||18.5 ||4.1 || JZQ 50-16 Ⅱ-2 ||22.83|
|Φ2.2*12 m ||12 ||18.5 ||3.2 || JZQ 650-Ⅲ ||37.6|
|Φ2.2*14 m ||12 ||22 ||3.2 || JZQ 650-Ⅲ ||40|
|Φ2.2*16 m ||10-13 ||30 ||3.2 || JZQ 750-Ⅲ ||45|
|Φ2.4*14 m ||10-14 ||30 ||3 || JZQ 750-Ⅲ ||51|
|Φ2.4*18 m ||25 ||37 ||3 || ZL 85-13-Ⅰ ||54|
|Φ2.4*20 m ||32-36 ||37 ||3 || ZL 85-13-Ⅰ ||54.14|
|Φ3*20 m ||40-50 ||55 ||2.59 || ZL 100-16-Ⅰ ||78|
|Φ3*25 m ||45-58 ||75 ||2.59 || ZL 100-16-I ||104.9|
Zhengzhou Jinyang Machinery Co., Ltd. URL: http: //www.ydqmj.org Wealth Hotline: 15138999183