Intermittent ball mill introduction:
Intermittent ball mill is one of high-tech products company Jinyang mixed mainly used materials, fineness grinding, product uniformity, save power. Both dry grinding can also be wet. Intermittent ball mill Use steel liner plate or silica liner, to meet different needs. Motor auto decompression start, reduce the starting current, the structure is divided into integral and independent style. This product has less investment than similar products, energy saving, new structure, simple, safe, stable and reliable performance characteristics, is suitable for mixing and grinding operation of general and special materials. Jinyang break intermittent dry and wet ball mill can work for feldspar, quartz, clay and other ceramic material of finely ground and mixing, the material, the mud hole sieve size by 1000, the aircraft is a high-fine milling equipment, materials into the mill should have the highest efficiency and economic benefits in the powder fineness broken state.
Intermittent ball mill principle:
Jinyang Intermittent ball mill is a horizontal cylindrical rotating device, the material from the feed device evenly into the ball mill cylinder into the compound by the air shaft spiral, there are ladder liner or corrugated liner, fitted with different specifications steel ball, rotating cylinder produces centrifugal force the ball a certain height After the fall, have severe impact on the material and abrasive, powdery substance is discharged through the discharge grate plate to complete the grinding operation.
Intermittent ball mill structure:
Intermittent ball mill It consists of feeding part; discharging Department; Rotary Department; Transmission Division (reducer; small transmission gear; motor; electric control). And other major components Cast steel hollow shaft, lined with removable, rotary gear casting hobbing, the body inlaid cylinder liner wear, has good abrasion resistance. The machine running smoothly, work reliably.
Intermittent ball mill installation
The machine should be installed on a solid concrete foundation. Foundation design and construction refer to intermittent mill base map to see the assembly diagrams and in order to ensure the positional accuracy of the process of using a large ball of each component does not change the basis of the formula should be used to block structure.
After the compressive strength of the concrete foundation of more than 75% can be installed in the above intermittent ball mill before installing response based quality inspection, requiring concrete defect did not affect the strength of the reservation number and location of holes to meet the requirements, set aside holes within no debris and stagnant water, no oil. using ground method 'when the installation work, on the basis of the surface should be embedded' center standard plate 'Draw all the center line on the basis of the former mill installed in the center of' Targets 'to make a mark on the red dot eye-catching as a reference center line installation.
1, the specific requirements of the main bearing portion main bearing member assembly see Fig.
2, the rotary portion of the barrel portion assembly see Fig.
3, transmission parts transmission parts assembly see Fig.
4. Referring to the relative position of the overall assembly drawing.
Intermittent ball mill main technical parameters:
| model || Loading capacity (ton / times) || Speed of bucket (r / min) || Equipped with power (kw) |
|600X700 ||0.05 ||50 ||1.1|
|900X1200 ||0.2 ||38.5 ||2.2|
|1300X1500 ||0.5 ||33 ||4|
|1800X200 ||1.5 ||24 ||7.5|
|2600X2800 ||5 ||16.5 ||18.5|
|3000X3800 ||10 ||14.5 ||37|
|3200X4600 ||15 ||13.5 ||55|
|3400X6600 ||18 ||13 ||75|
Zhengzhou Jinyang Machinery Co., Ltd. Website: http: //www.ydqmj.org Wealth Hotline: 15138999183