Potassium soap, ceramic mold release agents, AB plastic, gypsum powder, PU foam material

Potassium soap, ceramic mold release agents, AB plastic, gypsum powder, PU foam material
 

Product description:

Specializing in the production of potassium soap (SOFT SOAP), an aqueous release agent, ceramic mold release agents
Product Specifications: 15KG / barrel
Uses: ceramic base mold release agent
10 yuan one kg 15 kg bucket of the whole barrel lingers sell
Usage: 1 kg potassium soap water to cook four kilograms (or 100 degrees of boiling water to soak).
If used in the new CASE mother mold with potassium soap 1 kg 2 kg of water to cook the effect will be better. Please note that use.
CASE gypsum Instructions
o a, CASE plaster to use:
o 1, mixing water genre about 35-40%, that is, when one kilogram CASE gypsum, the water discharge 0.35-0.4 kg.
o 2, mechanical or manual stirring for about 8-12 minutes.
o 3, when the initial setting until CASE gypsum, trimmed skirt can be removed, the initial setting time is about 20 minutes or so.
o two, CASE mold manufacturing method:
o 1, the mixing well CASE gypsum slurry poured into the prototype.
o 2, after stripping, with the ocean dry paint coating 4-5 times in a row, on the outside Ethernet sunlight a day to dry bath.
o 3, first in the CASE mold, after ten minutes, washing with water with potassium soap whitewash. and so forth for a long time until the surface brightness CASE far, you can fill operation mode.
o 4, each time filling the mold stripping after work, unique painted potassium soap, then rinse. In this case the hands not to touch the CASE mold surface to prevent leaving scar patterns.
o Third, the appendix:
o 1, Yang dry paint available industrial alcohol (industrial ethanol) was diluted to a concentration of 40-50% reuse. potassium soap bubble application 2-4 times boiled before use.
Welcome to the major feed line or manufacturers calls negotiations, ordering.
Contact: Mr. Cheng / 13713130595. QQ: 414056886
Website: http:. // Shop35258658 taobao.com