Mingwei ultra-thin rail power supply EDR-75-24 75W 24V3.2A jingmeilipinpaisongzhong...

Mingwei ultra-thin rail power supply EDR-75-24 75W 24V3.2A jingmeilipinpaisongzhong...
 

Product description:

Product parameters:

  • Brand: MW / Ming-wai
  • Model: EDR-75-24
  • Modulation: Pulse width modulation
  • Connection: full-bridge
  • Function: Power transformer


■ Product description

The EDR / NDR series rail power supply is an economical, low profile, 75 watt-150 watt AC-to-DC rail-fed power supply for DIN Rail TS35 / 7.5 or 35/15, which meets the German industry standard. (75W 32mm / 120W 150W 40mm) The range is from 90Vac to 264Vac full range of AC input and in line with EN61000-3-2 standards and the European Union on the development of Of the harmonic current range of EDR / NDR difference is only slightly different EMC standards and NDR of the working environment temperature up to -20 ~ +70 ℃.

EDR / NDR is designed in metal case, which can improve the heat dissipation of the machine. The working efficiency of the EDR / NDR is up to 88.5%. Under the air circulation condition, the whole series can work at -20 ~ + 60 ℃ (NDR -20 ~ + 70 ℃) (UL508, TUV EN60950-1, and others), the EDR / NDR series is available in a variety of inductive or capacitive load applications, complete protection functions, and industrial control equipment certifications (UL508, TUV EN60950-1 and others) To become a highly competitive industrial application environment solutions, its main applications such as industrial control systems, semiconductor manufacturing equipment, factory automation, electrical and mechanical equipment, etc.

■ Main features
Universal universal AC input voltage
Mounted on DIN rail TS35 / 7.5 or 15
Short circuit protection / overload protection / over-voltage protection /Overheat protection
International Safety Certification UL / CUL / TUV / CB / CE
Shanghai Lez Technology Development Co., Ltd. Production
LED indicates the operating status
Meet UL508 (industrial control equipment) standards
Natural ventilation cooling
In line with EN61000-6-2 (EN50082-2) industrial anti-jamming requirements
Low price, high cost performance
100% full load burn-in test
Lead-free process, in line with environmental RoHS requirements
Taiwan Ming-wai brand, Suzhou factory production
2 year warranty
■ The main parameters

Installation instructions

model:
Shell type switching power supply

Description:
Shell-type power supply includes a metal shell and plastic shell models, the internal PCB board is wrapped by the shell, usually installed in the system cabinet.Mingway power supply according to the power rating and design concept is divided into two different types: one is built-in Cooling fan, and the other is without a fan.

installation:







1. Before installation or maintenance work, disconnect the power supply from the application system and ensure that it is not automatically reconnected without notice!
2. Please refer to the enclosure diagram on the sample manual for the most appropriate mounting screws. 'Buy power supply for Leitz with Mingwei'. For questions, please call 400 600 0430.
3. The non-standard mounting direction or the power supply operating at high ambient temperature will cause the internal components of the power supply to rise in temperature and should be used for derating applications. Good work load.
4. Fans and vents should not be obstructed by anything. If there are other heat sources nearby, keep at least 10-15 cm
5. The recommended wire sizes are as follows
AWG 18 16 14 12 10 8
Rated current (A) 6A 6-10A 10-16A 16-25A 25-32A 32-40A
Wire cross-sectional area (mm square) 0.75 1.00 1.5 2.5 4 6
Note: The maximum surge current is only applicable to 1-4 core, 5 core surge current can not exceed the rated current of 80%
Make sure that all wires are wired in the terminal block and that the terminal screws are tightened to prevent poor contact.
6. Additional information about the product can be found on this website

Warning !!

1. To prevent electric shock and burn risk, all power supply faults should be checked by a qualified electrician. It is strictly forbidden to remove the power supply case.
2. Do not install the power supply in a humid environment or near water.
3. Do not expose the power source to high temperatures and near sources of ignition. Refer to the specifications to determine the maximum ambient temperature for the power supply application.
4. The output voltage and output current can not exceed the ratings specified in the specifications.
5. The ground wire (FG) must be connected to the ground. 'Buy a power supply to find Lezi with Mingwei'. If you have any questions, please call 400 600 0430.
6. Since all power supplies are part of the application system, when the power supply is integrated into the application system, the EMC of the final system will need to be re-tested to confirm that the power supply is only one part of the application system,