Ruishixika 11FC-component polyurethane sealant

Ruishixika 11FC-component polyurethane sealant
 

Product description:


Sikaflex-11FC Polyurethane Sealant
use
As the elastic adhesive for:
* Combination of metal frame building
* Cover and corner portions treatment
* Lightweight construction materials
* Acoustic ceiling
* Wood, metal or plastic window and door frames
* Floor baseboard and threshold
As the elastic sealants are used:
* Concrete; Epoxy; Stone; and stone ground joint seal
* Roofing and gutter seams sealed
* Flexible ventilation seals
* Cisterns, tanks and silos
* Bolt lap joints
* Seal wall or floor penetration holes, sanitation
advantage
l The new Sikaflex-11FC Polyurethane sealant, adhesive can be firmly bonded with adhesive cleaner original Sikaflex-11FC
* As with all of the cement matrix; brick; glazed tiles; polyurethane;; polyester bonded epoxy, and some good metal timber
* Rapid solidification
* Lightweight construction materials
* Strong durability
* Wear resistance, high tear strength
* Good weathering and water resistance
* Vertical joints 30mm wide phenomenon within a non-drip hanging
* Site that is used, without agitation
* Non-corrosive
* Can cover a variety of water-based coating / solvent-based / rubber-based paints (recommended to do preliminary tests)
* Proven to contact with drinking water

Technical data (standard)
Color color
Gray; white; black
dense degree
About 1.20-1.27kg / L
base quality
Moisture-curing polyurethane polymer
fight end
For more details, reference 'Primer Selection Guide'
Construction of the temperature
5℃-40℃
Operating temperature
-40 ℃ - + 80 ℃ (hot water up to 50 ℃)
Storage period
The following 30 ℃, intact sealed packaging can be stored for at least 9 months
Forming time
45-75 minutes, and weather-related
Shore A hardness
40-45
Elastic recovery rate
) 90%
tensile strength
20 ℃, elongation of 50%, in order to 0.5Mpa
Elongation at break
) 400%
The maximum extension and compression performance work
Referring to the joint design part
Tear strength
7Mpa
Tensile strength at break
About 1.4Mpa