Shanghai planing machine | Jiangsu planing machine | Shandong planing machine | Anhui planing machine

Shanghai planing machine | Jiangsu planing machine | Shandong planing machine | Anhui planing machine
 

Product description:

Germany N.KO Enke automatic walking plate groove machine
Mainly has the following characteristics:
1: Bevel workpiece by the Encore UZ15 i.e. out of the groove can be used for welding, you do not need to do any processing of N. KO thickness of any material can be cut to 5-40mm, minimum width 70mm, a minimum length of 150mm. .
2: bevel angle in the range of 15 degrees -50 degrees, free, without the need replacement parts.
3: pressure bar and the workpiece support member may be marked up or down to adjust the range of the scale.
4: German Enke machine is equipped with four slots for easy handling and long, thick piece fixed.
5: Germany N.KO Enke plate groove machine can be vertical or horizontal operation of the machine, the need to cut workpieces are firmly fixed
6: Enke UZ15 from the left or the right groove flexible operation.
7: All circuits Enke devices are installed in the dust-free box, safe machine operation.
8: CE compliant

Germany N.KO Enke automatic walking plate groove machine
Technical Parameters
Maximum groove width: 15mm
Bevel angle: 15-50 degrees arbitrarily adjusted
Material thickness can be cut: 5-40mm
power: 1500 watts
Rotating speed: 3600 rev / min
speed: 3.5 m / min.
Voltage: 380V
weight: 88KG
Use without turning the workpiece can be achieved on both sides of the groove