C4-73-type dust centrifugal fan

C4-73-type dust centrifugal fan
 

Product description:

use
C4-73 type centrifugal fan for the carriage containing dust, wood chips, fine fiber protection and other gases special equipment can also be used as general ventilation (eg dust removal device must be added in front of the fan inlet when the carriage of hard particles) .
Form structure fan
C4-73 type centrifugal fan mainly by the impeller, housing, air inlet, rack transmission parts and electrical components.
Impeller in part by the 12 backward wing-shaped blade, curved front plate and the plate after plate composed of blades, the front disc, rear disc are 16 board manufacturing manganese entire impeller diameter is too dynamic and static balance correction, air good performance high efficiency, smooth operation.
Chassis made whole, impeller installation and removal side with the cabinet were.
Inlet formed integrally mounted on the fan side. Parallel to the axis of cross-section shape of the curve, the gas can smoothly enter the impeller and smaller losses.
Transmission part by the spindle bearing housing, bearings, pulleys and components. Fans can be made right rotation and left rotation in two forms. Elevation from the pulley end, the impeller rotates clockwise, rotating fan called the right to 'the right' means Press the counterclockwise rotation, called the left rotary fan to 'left', respectively.
Export position of the fan to the outlet angle to the cabinet said the adjustment range is between 0 ° ~ 225 °, the interval 45 °. Are made of a form of the factory, the use of units required to install angled as required. Order may not need to specify the loan.
Fan with V-belt drive, such as when used on pressure and flow in mind there is a change of requirements, can be adjusted according to the provisions of its own performance on the table.
C4-73-type dust blower performance parameters
Machine No.
Rotating speed
(R / min)
With motor
(Kw-p)
flow
(M3 / h)
Full pressure
(Pa)
3.6C
4000
7.5-2
4250-7760
3138-1863
3550
5.5-2
3780-6910
2451-1471
3150
4.0-2
3100-5750
1863-1127
2800
3.0-2
2990-5450
1569-931
2500
2.2-2
2640-4870
1225-735
2240
1.5-2
2380-4350
1029-588
2000
1.1-2
2140-390
784-441
1800
0.75-4
1930-3510
637-392
1600
0.75-4
1725-3150
490-294
4.5C
3550
15-2
7400-13500
3922-2255
3150
11-2
6500-11900
3089-1814
2800
7.5-2
5800-10500
2451-1422
1800
2.2-2
3700-6800
980-588
1600
1.5-2
3300-6050
784-470
1400
1.1-4
2900-5300
608-362
5.5C
2800
22-2
10600-19350
3667-2177
2500
18.5-2
9500-17300
2902-1726
2240
11-2
8400-15350
2314-1372
2000
7.5-2
7550-13800
1922-1088
1800
5.5-2
6800-12400
1471-872
1600
4-2
6060-11100
1261-711
1400
3-2
5260-9650
902-539
1250
2.2-4
4750-8650
725-431
1120
1.5-4
4220-7700
578-343