50N thrust test finger, 75N test directed with thrust test finger

50N thrust test finger, 75N test directed with thrust test finger
 

Product description:

Thrust test finger; test directed; belt thrust test finger
Basic introduction :

1, made ​​according to the corresponding provisions of GB4706.1, GB2099.1 and related IEC61032, UL and so on .
2, the test is carried out directly at household and similar electrical appliances necessary protection against electric shock test .

Product Overview: meet the GB4706, IEC335, GB8898, IEC60065 and other standards, applies to the appliance accessible live parts of the structure and shell for protection performance check .

Thrust : CX-50N

CX-75N

CX-20N
Test finger use
1. not less than 40V with a 50V power supply is not greater than, the end of the power supply with a light bulb in series with the test finger after ( or pins, rods ) of wires, and the other end is connected to the test sample ;
2. Press the prescribed test finger ( or pins, rods ) in contact with the test sample, the lamp is lit for the failure, otherwise qualified.