E17 lamp holder through regulation, E17 lamp holder only regulation, E17 lamp holder contact performance regulations

E17 lamp holder through regulation, E17 lamp holder only regulation, E17 lamp holder contact performance regulations
 

Product description:

E17 lamp through regulation; E17 lamp holder only regulation; E17 lamp holder contact performance regulations

E17 lamp holder through regulation 7006-27K-1
E17 lamp holder only regulation 7006-28F-1
E17 lamp holder contact performance regulations 7006-26D-1

E17 lamp holder through regulation stop

E17 lamp holder through regulation to use

Objective : to test the finished lamp E17 screw cap the maximum size and the minimum value T1

Instructions:
a) when the inner cap is fully finished family into the gauge on the lamp, lamp center contacts should be in contact with the X-plane .
b) When the lamp is removed from the gauge, at least it should be rotated two full turns to off threads.

Supply E17 lamp holder only regulation 7006-28F-1
E17 lamp holder only regulation detection methods:

Objective : to test the finished lamp E17 screw cap the minimum outside diameter ( dimension d).

Usage: When the gauge set on the finished threaded cap lamp, lamp center contact should not protrude gauge X surface .

( Note: The test gauge using only its own weight carried )