Jilin recommended to use 860 color steel tile press, steel structure with 860 Matsubara do roof tile press machine to buy contact telephone number, 13754477130
Tile press use under normal circumstances require an upper mold and the lower mold six identical size specifications, the first device on the die and a lower die, and then the next runner mold direct means of hexagonal table, on the slippery mold apparatus Block bottom surface, but also the thickness of the plate is placed properly, so in order to ensure the upper and lower mold clamping, the average gap around the edge, at intervals equal to the thickness of the tiles between the upper and lower mold required.
Next, we introduce automatic discharge, whichever is blank work program: die device and the host with the above-mentioned test, then open air compressors, vacuum pumps, extruders, Mitreva machine, discharge machines, tile press, host and Salvatore walks machine, parking, first suspend the extruder, and then discontinue other equipment to ensure safety.
Let us introduce handmade tile press equipment put blank, blank work procedures take:
1, prior to the use of color-coated steel tile press equipment, to check whether convergence around reliable.
2. The device bolts, nuts can tighten.
3, around the enclosure should add a little smooth oil.
4, first empty running seriously look at, with or without vibration, noise, oil window can be oil, each member movement can reconcile.
5, when the device die, must cut off the power.
Contact telephone number, 13754477130
Contacts, Chaijin Juan (Ms.)
Contact QQ, 517065100
Original Address: Cangzhou City, Hebei Province, 104 State Road, Botou Xinfeng pressure watts Factory