XST single input channel instrument

XST single input channel instrument
 

Product description:

Explanation
① basic error is better than ± 0.2% F · S. 16 bit A / D converter. Control period 0.2 seconds, can be increased to 0.1 seconds. 8 Line segment function ② anti-jamming design, inhibit the scene of relays, contactors, etc. produced rapid burst interference and other electromagnetic interference, immunity to level III
③ Input signal: special indexing RTD, thermocouple, DC current, DC voltage, remote pressure gauges F2, WL, etc., when ordering.
④ Dimensions: 160 * 80 (horizontal / vertical), 96 * 9696 * 48 (horizontal / vertical), 72 * 7248 * 48 and desktop laboratory instruments
⑤ instrument power 220V AC. (9~ 30) V DC (specify when ordering)
basic configuration
Single Display
extensions
① alarm setting digital display
② measurement Bargraph
③ Alarm Output: 160 * 8096 * 96 size can add up to 4:00; 96 * 48 size can add up to 3:00.
72 * 7248 * 48 gauge up to plus 2 points; 160 * 80 aluminum shell type can add up to 8:00
④ transmission output
⑤ outside for the general power supply (to the transmitter power supply): 24V or 12V or 5V
Outside for precision power supply (load, pressure sensor power supply) 10V or 12V or 0.5~ 1.5mA
⑥ Communication Interface: RS 485 or RS 232
⑦ printer interface (without the printer unit)
⑧ laboratory benchtop meter: Small Desktop (230 * 104) (available disk loading), large desktop (318 * 104)
⑨160 * 80 aluminum shell type
Selection Tables

content
Code Description
XST /
Single Display
shape
size
A
160 (W) *80 (H) *125 (L) or80 (W) *160 (H) *125 (L)
B
96 (W) *96 (H) *112 (L)
C
96 (W) *48 (H) *112 (L) or48 (W) *96 (H) *112 (L)
D
72 (W) *72 (H) *112 (L)
E
48 (W) *48 (H) *112 (L)
Panel form
H
Horizontal
S
Vertical
F
Square
display method
( led Color display by ordering requirements)
1
Measured value (green)
2
Measured value (green) + Setpoint (red)
3
Measured value (green) + Measurement light beam (green) (limited A,C Type instrument)
4
Measured value (green) + Measurement light beam (green) + Setpoint beam (red) limit A-S type
5
Measured value (green) + Measurement light beam (green) + Setpoint (red) limit A-S type
Input signal
(When the input signal ordering others)
E
Thermocouple K,S,R,B,N,E,J,T Or radiation temperature meter
R
Thermal resistance Pt100, Cu100, Cu50, BA1, BA2,G53 Or resistance
I
DC current (4~20) mA ,(0~10) mA or (0~20) mA
V
DC voltage (0~5) V,(1~5) V
M
mV Signal (ordering range)
W
Potentiometer ,;
L
Remote pressure gauge
Number of alarm points
T•
T0: No alarm T1 ~ T8: 1~8 Point alarm Contact rating 220V AC, 3A
Transmission output
A0
No output
A1
Current output (4~20) mA ,(0~10) mA or (0~20) mA
A2
Voltage output (0~5) V,(1~5) V
A3
Voltage output (0~10) V
A4
Other output
External power supply
B0
No external power supply
B1
External supply 24V DC Error is less than ±5% ,more than the 50mA
B2
External supply 12V DC Error is less than ±5% ,more than the 50mA
B3
Outside for precision voltage source, error is less than ±0.2% ,more than the 40mA
B4
Outside for precision current source, the error is less than ±0.2%,( 0.1 ~ 10mA)
B5
other (Ordering instructions)
Communication Interface
(Independent power supply, full isolation.2400~19.2K Instrument address 0~99 , The response delay is less than500μs)
S0
No communication interface
S1
RS-232 interface
S2
RS-485 interface
S3
RS-422 interface
S4
BCD Code Interface (limited A,B Type instrument)
Instrument Power
V0
220V AC
V1
24V DC
V2
12V DC
V3
other
Print function (limit A,B Type instrument) (with hardware clock)
P
P It indicates that the print interface can be omitted without
Non-standard features
N
N It represents a non-standard function

Instructions free of charge Phone: 400-676-6002