ZRN-LDC-D high-voltage electromagnetic flowmeters

ZRN-LDC-D high-voltage electromagnetic flowmeters
 

Product description:

one, High pressure electromagnetic flowmeter Overview:
ZRN-LDC-D-pressure electromagnetic flowmeter is made using a proprietary technology special process to produce high-pressure type electromagnetic flow sensor and pressure-type electromagnetic flow converter supporting the composition, specifically for geology, oil exploration, oil under high pressure conditions of the measurement system mud, slurry, high pressure water and other conductive liquid or liquid-solid two-phase medium volume flow.
two, High pressure electromagnetic flowmeter Features:
Measurement from the fluid density, viscosity, humidity, pressure and electrical conductivity change.
Measuring tube unimpeded moving parts, no pressure loss, the lower section of the straight pipe requirements.
Sensor with ground electrode to realize the meter well grounded.
Sensor uses advanced processing technology, the instrument has a good ability to resist negative pressure.
Smart Converter with LCD backlit LCD display, can reflect sunlight or under a dark room reading easier.
Smart Converter can display the percentage of volume flow, the actual flow rate and total flow.
Setting parameters via infrared touch buttons, in the harsh environment does not open the cover of the converter can be safe set.
Converter with self-diagnostic alarm output, empty load detection alarm output, upper and lower flow alarm output, bipolar flow value alarm output function.
High Pressure Electromagnetic Flowmeter sensor lining F46 special proprietary manufacturing process, specifically used in petroleum, chemical and other industries.
three, High pressure electromagnetic flowmeter Technical Parameters:
Nominal Diameter: DN10 ~ DN300
Accuracy: ± 0.5% of indicated value, ± 0.3% of indicated value or optional ± 0.2%
Lining: F46, polyurethanes, plus net PFE
Electrode materials: 316L stainless steel, Hastelloy B, Hastelloy C, titanium, tantalum electrodes
Medium conductivity: ≥3μs / cm
Nominal: 6.310162532MPa
Medium temperature: 0 ~ + 80 ℃ (converter) 0 ~ + 180 ℃ (sensor)
Ambient temperature: -25 ℃ ~ + 60 ℃
Power source: 220VAC 50Hz or 24VDC
Connection: flange type, oil azelaic formula
Protection class: sensor IP65, IP68 optional (IP65: dust tight, water proof IP68: dust tight, long-term work in the water.) Converter IP67 (IP67: dust density, can be short-term immersion, at least 30 minutes)
Explosion-proof mark: Ex electromagnetic flowmeter explosion-proof grade ExmIIT4, ExmdIIBT4