ZRN-WZP-P Chip Temperature Sensor

ZRN-WZP-P Chip Temperature Sensor
 

Product description:

ZRN-WZP-P series SMD temperature sensor pt100 Mainly used to measure the temperature of the surface, which is fixed by screws or other ways sensors attached to the surface, to achieve the ideal temperature effect. Chip temperature sensor and measured object contact area, close contact, so in some surface temperature measurements have obvious advantages: high temperature measurement accuracy, fast response, small size and easy fixed installation.
model
Technical Parameters
ZRN-WZP-P
1. Platinum resistance: Pt100, Pt500, Pt1000
Temperature range: (-80 ~ 300) ℃
2. Common Accuracy Grade: A Grade: ± (0.15 + 0.002 | t |) ℃
Grade B: ± (0.30 + 0.005 | t |) ℃
| T | - absolute value of the actual temperature of
3. atmospheric pressure conditions for the existence of pressure, please indicate the size of the pressure


(A1) I


(A2) II

This is a diagram to real product

Common Size:
a = 15 (L) * 5 (W) * 3 (H) (Aluminum)
b = 30 (L) * 25 (W) * 10 (H) (Aluminum)
c = 40 (L) * 15 (W) * 15 (H) (iron)

selected type table
ZRN-WZP-P
Platinum thermal resistance model
A
1=
2=
a type size (non-magnetic)
b Type Size (0 = non-magnetic, 1 = magnetic)
c Type Size (0 = non-magnetic, 1 = magnetic)
Designation
Sensor structure
B
1 = Pt100 5 = Pt500 10 = Pt1000
Sensor Type
T
1=-50~80 2=0~100 3=-50~200 4=-50~250
Designation
Temperature range (℃)
P
B = B grade A = A grade specified
Sensor accuracy
Y
1 = 10002 = 2000 designated
Lead length (mm)
E
2 = two 3 = three-wire line 4 = four-wire
Lead wire
F
1 = polyvinyl chloride PVC (-20 ~ 80 ℃)
2 = polyurethane TPU (-50 ~ 100 ℃)
3= Teflon (-50 ~ 250 ℃)
Designation
Lead Material
Lead in parentheses common temperature range
H
0 = no, do not fill
1 = both
Conductor shield /
Cable sheath
Z
0 = no, do not fill
Designation
special request
Remark : For user-specified parameters required, directly to the numerals or letters marked out
Selection example : ZRN-WZP-P -A 2 b1- B1 T3 PA- Y1- E3 / F3 / H1
Explanation : PT100, temperature range -50 ~ 200 ℃, accuracy class A, wire length 1m, three-wire system.
Dimensions of 30 (L) * 25 (W) * 10 (H), a magnetic

Chip Temperature Sensor Mainly used to measure the surface temperature, the SMD temperature sensor by a screw or a magnet attached to the surface of the sensor, the ideal temperature to achieve results. This patch by temperature sensor with different types of thermal resistance, thermocouple measuring various range of temperatures.
Technical Parameters
Platinum RTD: Pt100, Pt500, Pt1000 temperature range: (-200 ~ 400) ℃
Accuracy class: A class ± (0.15 + 0.002 | t |) ℃ Grade B ± (0.30 + 0.005 | t |) ℃ Note: | t | is the absolute value of the measured temperature.
Thermocouple: K-type coupling (0-900 ℃), etc.
Accuracy class: II Level
Chip Temperature Sensor Temperature mode: contact temperature measurement
SMD temperature sensor default specifications (for RTD or 0-600 ℃ thermocouple signal within 250 ℃)
Length (L) = 40mm width (W) = 20mm thickness (D) = 10mm diameter = 8 mm fixing hole probe diameter D = 6 mm probe length: For thermocouple signal exceeds 100 ℃, the probe must be long enough to do so that the temperature dropped to within 100 ℃
Note:
1, for the measurement of thermal resistance higher than 250 ℃ signal (Pt100, Pt1000, etc.), the patch probe diameter D = 8mm thickness = 12mm

2, the measurement signal is higher than 600 ℃ thermocouple (K, E, etc.), the patch probe diameter D = 8mm thickness = 12mm

3. For special temperature requirements, you can customize the patch sensor dimensions and diameter of the fixing holes and sensor parameters