ZRN205 explosion-proof pressure transmitter

ZRN205 explosion-proof pressure transmitter
 

Product description:

product description ZRN205 series Explosion-proof Pressure Transmitter It is designed for high explosive hazard workplace design, and absolute pressure in a liquid or gaseous medium, gauge pressure, differential pressure to provide a stable and accurate measurement between -100KPa to 200MPa. It uses the welding process will be ready German HELM polysilicon thin film biography sense element and the housing insulation displacement connector as a whole, may be required to quickly customized to suit the individual needs of different users, and maintains all the original features of HELM pressure sensor chip. Built-amplifying circuit, structural forms, can be with M20 * 1.5 or G1 / 2 internal thread hose connector explosion.
ZRN205 series Explosion-proof Pressure Transmitter Good performance, small size, flexible design, compared with the traditional explosion-proof transmitter with high performance and low cost, and long service life, widely used in oil fields, mines, chemical, electric power, boilers, natural gas and other fields. • The Ann and explosion-proof certification: Ex iaⅡCT5, Ex dⅡCT6
• Measuring range: -100KPa ~ 0 ~ 200Pa ~ 200MPa
• gauge pressure, absolute pressure, differential pressure optional
• Use explosion-proof original HELM polysilicon thin-film chip, stable and reliable performance, long life
• Power reverse polarity and over-voltage protection
• Explosion-proof design, structural forms, secure and reliable
• strong anti-interference, strong vibration resistance, excellent long-term stability
Performance parameters
Measuring range
-100KPa ~ 0 ~ 200Pa ~ 5KPa... 200MPa
Overload
2 times full scale pressure (100MPa products which overpressure of 1.1 times full scale pressure)
Pressure Type
Gauge pressure, absolute pressure, differential pressure
Measuring media
Compatible with 316 stainless steel gas or liquid
Overall accuracy
Nonlinear, repeat type, hysteresis
± 0.1% FS
± 0.25% FS
± 0.5% FS
Long-term stability
Typical: ± 0.1% FS / Year
Maximum: ± 0.2% FS / Year
Zero temperature drift
Typical: ± 0.02% FS / ℃
Maximum: ± 0.05% FS / ℃
Full-scale temperature drift
Typical: ± 0.02% FS / ℃
Maximum: ± 0.05% FS / ℃
Operating temperature
-20 ~ 85 ℃ special can be -40 ~ 125 ℃
Compensation temperature
-20 ~ 60℃
Power range
12 ~ 36VDC (general 24VDC)
Signal output
4 ~ 20mA / 1 ~ 5VDC / 0 ~ 5VDC / 0.5 ~ 4.5VDC
Load Resistance
≤ (U-15) /0.02 Ω
Insulation resistance
Greater than 2000MΩ (100VDC)
Vibration
In the mechanical vibration frequency 20Hz ~ 1000Hz, the output changes less than 0.1% FS
weight
About 0.5 kg
Response time
≤1 ms
Explosion-proof Pressure Transmitter Selection tips:
Materials 1. measured medium in contact with the product should be compatible.
2. Selection of additional function code 'E Intrinsically safe Ex iaПCT5, subject to the power barrier.
3. Selection of additional function code 'D flameproof Ex dIICT6, followed by the installation of explosion-proof electrical cable best hose.
4. W1, W2 option is only used for general-structure package HM60-E Intrinsically Safe Pressure Transmitter.
5. HM60-ED intrinsically safe explosion-proof pressure transmitter when the system uses no need to install safety barriers
6. Other special requirements, please contact our company, and indicate in the order.
Product Selection
ZRN205
Explosion-proof Pressure Transmitter
Pressure Type
Gauge (G may not be standard); absolute pressure (A); differential pressure (D)
Range
(0 ~ X MPa) Measuring range
A
Overall accuracy (linearity + hysteresis + repeatability)
1
± 0.5% FS
2
± 0.25% FS
3
± 0.1% FS
B
Signal output
1
4 ~ 20mA
2
1 ~ 5V DC
3
0 ~ 5V DC
4
0.5 ~ 4.5V DC
C
Additional features
2
M20x1.5 external thread
2
G1 / 4 outer thread
3
special
4
Cable type (IP672m)
5
Hirschmann socket type (IP65, DIN43650)
6
OUTLINE (a)
7
Dimensions (II)
8
special
9
Pointer table (from 0 to 100%)
I
31/2 LCD display
L
31/2 LED display
P
Flush membrane type
D
Explosion Ex dII CT6
ZRN205-G -1 -A1 -B1 -C3 -D Explosion-proof Pressure Transmitter
Wiring diagram: