ZRN504 disc torque sensor

ZRN504 disc torque sensor
 

Product description:

Disc torque sensor torque sensor in the introduction of German technology developed on the basis of the sensor can measure torque parameters. Has a compact shape and a variety of optional mounting not only for laboratory, also suitable for industrial environments. Power and measuring signals are non-contact transmission for long-term use and low wear, and does not require any maintenance. For different applications, can also increase the speed of the test in the sensor.
Technical Parameters:
Range: 0 ~ 501002005001K, 2KN.m
Output signal: 4 ~ 20mA 1 ~ 5V 0 ~ 10V
Square-wave frequency: zero torque: 10 KHZ positive full scale: 15 KHZ
Reverse full scale: 5 KHZ
Speed: 0 to 12000 rev / min
Operating voltage: ± 15VDC 24VDC
Response frequency: 100 μs
Ambient temperature: -40 ~ 60 ℃
Torque overload: 1.2 times full scale
Accuracy: 0.1% 0.25% 0.5% F.S
Zero drift: less than 0.5%
Repeatability: ≤0.1% F · S
Hysteresis: ≤0.1% F · S
Linear: ≤0.1% F · S
Relative humidity: ≤90% RH
Features:
• Internal transfer mode using a unique non-contact input and output signals
• Measures static torque; dynamic torque.
• Measure positive, reverse torque, no need to adjust the zero point.
• signals using digital technology, strong anti-interference.
• Input power polarity, amplitude protection, output torque, speed signal protection.
• No collector rings and other wear parts, can be as high speed long-running
• torque and rotational speed measurement accuracy, independent of direction.
• High precision, good stability
• Measures forward and reverse torque, speed and power.
• Small size, light weight, easy installation.
• high reliability and long life.
• can be anywhere, in any direction
Connection size
Installation Notes:
1, the use of the coupling, the torque sensor is installed between the power terminals and the load.
2, the coupling should try to be a torque sensor shaft mounting.
3, power equipment, load equipment, torque sensors to adjust the time-axis coaxial.
It requires less than 0.1mm.
4, the torque sensor can be used just connecting or soft connecting small-scale torque sensor
Recommended to choose soft connection
5. When installing the torque sensor is fixed firmly to avoid excessive vibration, or else
Measurement data can cause instability, affecting the measurement accuracy and torque sensors
Damage.
6, when the torque sensor is mounted horizontally or vertically, to avoid too much to bear
Axial force, bending moment, so as not to affect the use of the torque sensor is damaged
Dimensions:

Selection torque sensor disc size table:
Range Nm A L L1 D0 D1 D2 D3 D4 D5 D6 b a c d H h M Weight kg
5-100 65 120 95 114 50 50 86 78 40 40 7.5 44 7 12 143 86 8 2.8
200-500 65 150 120 144 70 70 116 108 56 50 10.5 38 9 12 179 107 12 5.2
10002000 65 180 150 170 95 95 140 136 60 60 11.5 38 11 15 202 117 14 8
5000-50000 By drawing