Professional production and supply of sunshine board accessories - aluminum batten (variety of standard models)

Professional production and supply of sunshine board accessories - aluminum batten (variety of standard models)

Product description:

Material: Aluminum Number of floors: Other Origin: Foshan
Grade: A Level Specification: 6m / support Open: Manual
Brands: Conrad Color: silver

Foshan into a giant dedicated PC sun panels; polycarbonate panels aluminum accessories development; production and sales; as the most professional solar panels installed aluminum parts suppliers currently operated by my company produces solar panels of aluminum parts up to more than 60 species. complete model specifications, fast delivery, quality and cheap, while welcoming customers to sample production and processing.

PC special mounting plate aluminum accessories (Aluminum bead / aluminum closing edges) is mainly used for fastening PC board mounting water leak, high-quality accessories can make more beautiful lighting cover sun roof, and after the construction of the installation can be more effective solution leakage problem, and we can provide you with professional PC sheet up to more than 60 kinds of accessories, we can meet all your needs, and have their own professional R & D personnel constantly improve and update products, so you can have more select.

Aluminum layering Mainly used for fixed installation joints between the PC sheet, with self-drilling screws, butyl waterproof tape and EPDM strips can effectively play the effect of water leak, and aesthetically pleasing, durable, will not cause corrosion of the plate.

Material: 6063

Specifications: Width 25mm / 30mm / 32mm / 35mm / 36mm / 38mm / 43mm / 45mm / 48mm / 50mm / 55mm / 60mm * Length 6m / support

50mm aluminum batten; for 8mm-16mm large municipal PC sunshine board; polycarbonate panels construction installation:

36mm aluminum batten for construction and installation of solar panels of 4mm-6mmPC:

Other aluminum layering with use of related accessories:

EPDM EPDM seals:

Use strips of sun-engineering, leak-proof water effect was significantly higher than unused strips project.

Other on sun panels, polycarbonate panels installation and construction process should note:

1. The construction and installation should allow sufficient space for expansion and contraction calculated by the following formula:

Thermal expansion and contraction value = linear expansion coefficient * length * The maximum temperature difference before and after the installation (linear expansion coefficient is 0.065mm / m ℃)

2. The selection of sealing materials, are required to use a neutral. For careful consideration, advises clients to do compatibility tests before use. Improper sealing material will lead to PC sunshine board Nai Liban destruction.

3. loft scribe mark at the plate protective film as much as possible, such as to be directly marked on the plate, it is recommended to use crayons, avoid the use of sharp tools.

4. When new buildings cement surface is dry. PC sunshine board Nai Liban is not directly touching on it, even after the cement surface should also be done at the contact surface of the mat material other PC board and cement surfaces spaced plates and cement surface to prevent corrosion of the sheet material in cement is alkaline, etc.

5. PC polycarbonate panels can be cold-formed shape, its minimum bend radius must meet the following conditions:

Outdoor Use: bending radius of not less than 180 times the sheet thickness.

Indoor Use: bending radius of not less than 150 times the sheet thickness.

6. The sheet cleaning with a soft cloth or sponge dipped in a neutral soap or detergent scrub PC sheet surface dust; dirt; then rinse thoroughly with water, and finally with a soft cloth.

7. If grease board; wet paint; rubber tracks and the like; recommend using a soft cloth moistened with absolute alcohol scrub.

8. PC polycarbonate panels embedded framework should be preceded by the embedded portion of the protective film off.