Meanwell waterproof LED power APV-25-12 25W 12V2.1A

Meanwell waterproof LED power APV-25-12 25W 12V2.1A

Product description:

Product parameters:

  • Brand: MW / Meanwell
  • Model: APV-25-12
  • Modulation: Pulse width modulation
  • Connection: Full Bridge
  • Function: Waterproof Power Supply

■ Selection Points
1. The power supply output voltage must be equal to the load voltage. Voltage may burn your equipment does not match or can not start
2. The output power must be greater than the load power. Otherwise cause overload when the output current is greater than the current overload protection
■ Product Description

Cheap Cheap Square plastic housing, IP30 protection class of LED lighting with waterproof power supply, -30 ~ 70 ℃ wide operating ambient temperature range suitable for indoor LED lighting LED electronic billboards or related use.

■ Main features
Full range universal AC input voltage
Fully enclosed plastic case with IP30 protection standards
Short circuit protection / overload / overvoltage protection
International Security Certification: UL / CE
Shanghai Science and Technology Development Co., Ltd. hereby make music
Constant work
Class II input, no housing ground
Class 2 power supply unit
By LPS (Limited Power Source) test
100% full load burn-in test
Lead-free manufacturing process, in line with the requirements of environmental protection RoHS
Taiwan Ming Wei brand, the Guangzhou factory production
2-year warranty
■ The main parameters
DC output range 12V, 0 ~ 2.1A
Output voltage accuracy ±5%
Ripple 120mV
effectiveness 82%
Input voltage range 90 ~ 264VAC / 127 ~ 370VDC
Input surge current Cold start, 45A / 230V
Leakage current <0.25mA / 240VAC
Overload Power is greater than 105% of rated output power is turned off, automatic detection, automatic recovery
Overvoltage protection Rated output voltage over 13.8 ~ 16.2V when the output voltage is turned off, restart recovery
Start Rise Hold Time 230VAC at full load 1500ms, 30ms, 20ms
House music hereby franchise stores All rights reserved Do not copy
Insulating properties Between the input and output terminals: 3KVAC
Operating temperature -30 ~ + 70 ℃ (refer to output derating curve)
Vibration resistance 10 ~ 500Hz, 2G 10 min / cycle, XYZ axes each 60 minutes
Safety certification UL8750, CSA C22.2 No.250.0-13 certified by TUV EN61347-1 reference design
Electromagnetic Compatibility Emission: EN55022, Harmonics: EN61000-3-2 class A, EN61000-3-3
Electromagnetic Compatibility Interference: EN61547, EN61000-4-2,3,4,5,6,8,11, A grade light industry standards (surge 2KV)
MTBF ≥69.28 ten thousand hours, MIL-HDBK-217F (25 ℃)
Wiring Input: UL certification, 18AWG × 2C (15cm) / Output: UL certification, 18AWG × 2C (15cm)
Chassis number PCD16A
Dimensions 84 × 57 × 29mm (length × width × height)
Weight and packaging 0.13 kg, 72 units per case /10.4 kg, 0.026 m3