Hand push chiseling machine 15376502873
ZM-80A handheld multi-angle cutting hair machine
Main purpose: designed primarily for highway, railway bridges, airports, bridges, parking lots and other Hand-ground chisel to remove the surface layer of concrete on the ground when the floating pulp wool concrete paving new ground, to achieve uniform rough For a variety of old ground floor before doing renovation process; removing damaged ground raised portion; epoxy floor cutting hair; ground do slip surface; new surface roughening, etc. with high performance and high efficiency.
Product Features :
Small model, body weight, you can do 24000-50600 times hammering frequency per minute. Hourly Gouge area of different concrete strength up to 30-100 square meters, while reducing the damage to the foundation. Vibration damping system allows the operator were more comfortable (4.96 m / sec 2), the machine is powered by a 3m3 / 7 or 4m3 / 7 公斤 air compressor to operate its chisel feather high quality tungsten steel alloy produced, each pay chiseling boots head altogether 11 or 23, each pay chiseling boots head service life of more than 3000m2; more than five times after replacing chiseling boots head, replace a rod and piston sets, which greatly reduces the cost of using chisel feather, and without opening the body to resolve within one minute replacement boots head.
80A handheld multi-angle cutting hair machine
The main purpose :
ZM-80A handheld multi-angle cutting hair machine is mainly applied to the reservoir, dam leakage, insurance Bridge Bridge by reinforcement, power plants, tunnels letter, highway, railway bridge and the surface layer of concrete box girder tick chisel, building walls , floors, and municipal engineering concrete pavement repair renovation excluding reinforcement and other fields.
ZM-80A handheld multi-angle cutting hair machine; cutting head diameter Ø80mm; there are 10 alloy head above; 2100 times per minute, hammering frequency equal to 2100 * 10 = 21000 chisel points; chiseling area of up to 4 per hour ~ 15m2 (drilled deep 3 ~ 10mm), while the biggest feature of the machine is suspended cutting hair, and has a high-performance shock absorbers, can greatly reduce the operator's labor intensity and prevent physical tremor disease, to ensure personal safety .
ZM-3C; ZM-2A; ZM-1B hand-held single / three chiseling machine
ZM-3C, ZM-2A, ZM-1B hand-held single / dual / three chiseling machine is mainly used in highway, railway bridge and the surface layer of concrete box girder tick chisel, building walls, floors, and municipal engineering concrete pavement repair renovation excluding reinforcement and other fields, in the course not only improve the work efficiency and quality and enable Face reach roughness uniform, removing the surface layer of pavement concrete laitance firmly bonded, eventually working life of the object and the safety factor has been greatly enhanced.
Models of small, lightweight body, head to do every minute of each chisel hammering frequency 2400 times per hour hammering the area by different concrete strength and deep chisel requirements to be completed by different about 3-10 meters, while reducing the underlying The destruction of The machine is powered by 0.7m3 / 5 公斤 pressure air compressor to operate its chisel feather high quality tungsten steel alloy chisel head, hardness, high hit quality.
The new one hundred million coal, always in good faith, to quality of survival, to the credibility of development. Based on customers, providing customers with the highest quality products, the best quality service. We warmly welcome you to inquire!
Sales Manager: Hou Guijuan
Sales Hotline: 153765028730537-3151358
Work QQ: 1684599823
MSN E-mail:. Yimeijixiehou @ 163 com
Company Name: Jining one hundred million coal Machinery Equipment Manufacturing Co., Ltd.
Company Address: Electromechanical South Road, High-tech Zone, Jining City, Choose one hundred million coal! Credit is guaranteed! Quality assurance! Service is guaranteed!