SD card controller programming Symphony | Symphony with a program controller | synchronous DMX512 signal controller

SD card controller programming Symphony | Symphony with a program controller | synchronous DMX512 signal controller

Product description:

Your friend Shenzhen 尚明光 Electric Co., Ltd. welcome you to visit us Thank you for your concern about our company and products;!!! On our part not to bring you good service apologize for the inconvenience, please for your understanding if We have what you need, please tell us your needs, so that we can better and faster service for you; If our products do not meet your needs or your use of our products and services are not satisfied, please criticism, correction and correction so that we can continue to move forward!

I. Overview:

1, the control can be equipped with mini SD.

2, boot press [ON / OFF] key will display SD00 or SD01, then press [UP] can convert SD00 and SD01. SD00 internal call on behalf of tricks, SD01 SD in delegate invocation pattern. RJ-FSD-1000 can Send to DMX512 and TTL signals.

3, using standard DMX512 choose built-in patterns and speed.

4, can be more than one, the synchronization signal is recommended not more than 50 meters, measured 100 meters.

5, the maximum drive 2048 pixels. Refresh rate up to 30 frame rate ((512 pixels).

6, the maximum distance between the controller and the lamp for the TTL (15 meters; 485 (30 meters .TTL simultaneously and then about 10.

7, the pressure test port signal DC30V safe to pass.

Power supply



L122 * W 73 * H25





Second, support for IC:

Support IC

Specific models


TM1809, TM1812, TM1914


UCS2903, UCS2909, UCS2912 UCS1903, UCS1909, UCS1912


WS2801, WS2812 WS2811




LDP6803, LDP8806, LDP1109





Other models, please contact our advice.

Third, the controller priority read SD card, SD card when not running the built-in pattern.

SD card status, you can select by key pattern and speed, which [on / off] key is not valid. Other operations without card as detailed below.

Fourth, the wiring

TTL: single-line and two-wire signal interface.

485: Elect model DMX512 DMX512 signal to send, when to send the differential signal other models; can be used with 485 receiving sheet so that the signal transmission farther.

V. Instructions

l election IC Type:

First press [ON / Off] key to display OFF to enter programming mode

Then press [Mode / Speed] selection

Choose the right model and then take [On / off] key to exit.

l control points set

First press [ON / Off] key to display OFF to enter programming mode

[UP] and [DOWN] set points. Access [On / off] key to exit.

l Set the pattern, speed, and DMX address

Under normal conditions, that is not in the OFF state.

Press the [mode / off] key to cycle through the digital beginning of the following PSA.

P stands tricks

S stands for speed

A representative of DMX512 address, attention is only useful when the DMX address decoding and control built-in patterns DMX512 standard DMX512 console.

Increases and decreases with the UP and DOWN keys.


1 Please note that when installing rain, the normal operating voltage recommended as DC12-24V.

2, the network line through the docking can be.

3, DC5V only take DC5, please contact DC5-24V under normal conditions.


Shang Mingguang electric -shinmi Product Description:
135,285,050 series of bare boards, Epoxy waterproof 12vLED soft light (white, warm white, cool white, yellow, green, blue, red, pink, purple, etc.), (RGB, Happy Valley, Symphony) LED soft light. (301,456,302,835,335 side emitting) LED soft light;

235,285,050 Series 220v LED lights with high pressure;

35050LED light bar, 5630LED light bar, 7020LED light bar;
43528 (color, colored, RGB) LED meteor shower lights, 5050 (monochrome, RGB) LED meteor shower lights;

55vLED perforation word string lights, 220v LED color light string festive decorations;

6, LED flexible light strip (RGB, Happy Valley, water, scanning, full-color, Symphony) controllers, signal amplifiers

75050LED module, 5730LED module;

8, LED switching power supply, power adapter

Shang Mingguang electric -shinmi Company Profile:

Shenzhen 尚明光 Limited ( 15818578585 QQ:... 2014037984 2602165622 www ledrdtc83 cn 1688. com) is a research and development, production, marketing LED flexible light strip, LED light bar, LED meteor light, LED modules, LED string lights and matching power supply, controller and other products of professional high-tech companies.

Shang Mingguang electric -shinmi Contact:

Tel: 86075533291948

Mobile phone: 15818578585

Fax: 86075533291948

Address: China's Shenzhen City, Guangdong Shenzhen Ping Shan District, Hang Chu Yang Jianye Road