Guardrail roll forming machine.

Guardrail roll forming machine.

Product description:

Quick Details

  • Place of Origin: Jiangsu, China (Mainland)
  • Brand Name: DB
  • Model Number: OEM

Packaging & Delivery

Packaging Details: Plastic film
Delivery Detail: 65days


1. Roll forming machine for highway
2. Reliable&stable
3. ISOandCE certification
4. OEM of many companies
5. Fast deliver

We manufacture Roll Forming machine, European roller shutter machine, C & Z purlin machine, Roof & wall forming machine, Octagon tube machine, Guardrail forming machine, Tile roof forming machine, Door frame forming machine, Down pipe forming machine, Slitting line, Sandwich panel line, Floor decking forming machine, Cable tray forming machine, uncoiler and recoiler, Double-layer forming machine, Ridge cap forming machine, Cut to length line, Shearing and press brake machine, T-bar forming machine, roller shutter slat forming machien, etc.

Guard rail roll forming machine

Component of the machine:
1. Roll forming machine include guiding, punching and cutting system.
2. decoiler (Automatic) .
3. PLC control system
4. Hydraulic station
5. Output table (Stacker) .

The structure of equipment

1, Hydraulic decoiler

l Single unrolling machine, one side can put material.

l Adopt automatic hydraulic system

l Coil weight (Max) : 7000kg

l Coil dia (Max) : 1600mm

l Oil cylinder dia: 1200mm working pressure: 10mpa

l Coil Width (Max.) : 500mm

2, feeding, leveling

l feed into unit oriented wheel (can right and left adjust)

l into feeding roller; dia is 180mm; material 45# steel; quenched 48°-52°; chromed

leveling is three roller above and four roller below, quenched and chromed

3, punching (can right and left adjust)

l using hydraulic punching

l oil cylinder dia: 140mm

l working pressure: 20mpa

l mould material: Cr12 quenched 58°-62°

l hydraulic power: 7.5kw

l size: 1.5m long*1.1m wide*1.2m high

4, roll forming

l main motor power: 45kw

l Decelerating motor: BWD14-43-37kw, made in Shanghai or


l drive: gimbal driving, 120*500

l main shaft dia: 100mm material: 45forge steel

l roller material: GCR15 quenched 58°-62°, chromed

l roll station: 17stations

l Timing by transducer: 5m-20m/ min (not including punching)

l Transducer: Panasonic made in Japan. 380V 50HZ

l Computer: PLC

l Computer operating panel: touching screen

5, cutting

l hydraulic cut

l knife material: Cr12, quenched 58°-62°

l oil cylinder dia: 250mm

l working pressure: 30mpa

l working journey: 80mm

6, the Outside size:

l 18m long*2.2m wide*1.5m high

7, Run out table

l Jointed by 60mm*40mm tube (can be adjusted to up and down)

l size: 1.5mlong*0.8mwide*0.6-1mhigh (can be adjusted)

4: The production flow of equipment

DecoilingFeeding (take the sheet to the first station) leveling-Punching of the sheet roll forming-hydraulic cut to lengthproduct packing manual.