double layer roll fomring mahcine

double layer roll fomring mahcine
 

Product description:

Quick Details

  • Place of Origin: Jiangsu, China (Mainland)
  • Brand Name: DB

Packaging & Delivery

Packaging Details: nude
Delivery Detail: 40days

Specifications

1. reliable and stable.
2. ISO and CE certification.
3. OEM of many companies.
4. fast delivery.

A. Roll forming main machine

1. Forming stations :

(1) : upper Layer: 18stations

(2) : Lower Layer: 18stations

2. Material of roller: S45C with heat treatment and surface is being hard chrome.

3. Shaft :

(1) : upper Layer: O.D. 75mm, high frequency surface treatment and grinding process; the material is S45C.

2) : Lower Layer: O.D. 75mm, high frequency surface treatment and grinding process; the material is S45C.

4. Horsepower: 20 HP (The motor is used to drive the hydraulic pump which enables the hydraulic oil to drive the hydraulic motor and then drives the main machine.)

5. Transmission: Chains and gears

6. Forming speed: 15M/ MINUTE

7. Forming thickness:

(1) : upper Layer: Aluminum Sheet: 0.3-0.8mm, steel sheet: 0.50mm

(2) : Lower Layer: Aluminum Sheet: 0.3-0.8mm, steel sheet: 0.50mm

Standard of the Trial Run:

(1) : upper Layer:

Thickness 0.5mm

Width: 1200mm

Material: CQ sheet, yield strength=250~300MPa

(2) : Lower Layer:

(1) : upper Layer:

Thickness: 0.5mm

Width: 1200mm

Material: CQ sheet, yield strength=250~300MPa

(3) The finished products will change if using different material and thickness is used.

8. Cutting:

(1) Flat-sheet cutting: It is used when changing the coil of raw material; it can cut the coil rapidly and time-saving.

(2) Cutting after forming: Cut the sheet after roll forming to required length

(3) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(4) Material of blade: SKD 11 with heat treatment

(5) Length measuring: Automatic length measuring

(6) Tolerance of length: +/ - 1.5mm

9. Cooling system: The air-cooling system is used; uses the powerful fan to cool down the hydraulic oil.

10. Forming process: Uncoiler Roll forming Cut to length

11. Approximate Size: Length: 8.5M. Width: 1.7M Height : 1.8M

12. Characteristics of the main machine

(1) Base is made of high tensile strength H beam with precision welded and good rigidity.

(2) Shaft, roller and all components are manufactured precisely to have long lifetime.

(3) Efficient design, easy maintenance

B.equipment list

NO. products quantity
1 manual decoiler 1
2 main roll forming ( cutting; PLC computer; hydraulic system) 1
3 output table 2

C.photo for refer