This LED Door Lights can be automaticlly on when car doors open.
Outpower: 3W/ 5W
Voltage: 12V/ 24V
Working Temp: -40 degrees~ 105 degrees
Material: Aluminium alloy casing
Life span: 30, 000-50, 000 hours
Certification: E4 / RDW
This LED lights can be installed at the bottom of the door flame and make sure the Len vertical with the ground ;
1. Pull down the inside door board first. Mark the suitable location for drilling a hole.
2. Drill the hole on the door board with our borer .
3. Inset the product from the bottom of car door , then arrange the power cord.
4. Install the nut through the power cord upon the hole inside; Tighten the nut;
5. Connect the power cord according to the installation guide;
6. Adjust the lamp projection to the suitable place with wrench tool.
7. Reinstall the inside door board, then check the final effect.