[Electronic and Electrical] - [LED equipment]

Taiwan Mingwei Power NES-150-12 150W 12V12.5A (exquisite gift delivery ...)

Taiwan Mingwei Power NES-150-12 150W 12V12.5A (exquisite gift delivery ...)
Product code: 15600900030
Unit price 15.98$
Sold quantity 1487
Available stock 199

Product parameters:

  • Brand: MW / Mingwei
  • Model: NES-150-12
  • Modulation: Pulse width modulation
  • Connection: full-bridge
  • Function: Power transformer


■ Optional accessories
■ Selection points
1. The power supply output voltage must be equal to the load voltage. Voltage discrepancies may burn your device or fail to start
2. Power output power must be greater than the load power. Otherwise, the output current is greater than the overload protection current causes overload protection
3. The power supply output current must be greater than the load start-up current (for inductive loads such as motors). Otherwise it may lead to overload protection at startup, can not boot
■ Introduction

A new generation of switching power supply, the relative Mingwei power of the old models, the volume reduction, the performance of a comprehensive upgrade, two-year warranty, lower prices, there is safety certification (including China CCC certification) low-power power supply the best solution.

■ Key features
Switch Selects the AC input voltage range
Short circuit protection / overload protection / over-voltage protection
Through the international safety certification UL / CB / CCC
Through the China National Safety Certification CCC certification
Natural ventilation cooling
Shanghai Lezi Technology Development Co., Ltd. Production
Small size, high power density
High cost, high reliability
100% full load burn-in test
The best solution for low-power power supply with safety certification
Taiwan Ming-wai brand, Guangzhou factory production
2 years warranty
■ The main parameters
DC output range 12V, and 0 to 12.5A
Output voltage accuracy ± 1%
Ripple 120mV
effectiveness 83%
Input voltage range By the switch to choose 85 ~ 132VAC / 170 ~ 264VAC or 248 ~ 373VDC
Input inrush current Cold start 230V when the 45A
Voltage adjustment range Rated output voltage of -5% to +10%
Overload protection Over-current point in the 110% to 150%, automatic detection of automatic recovery
Overvoltage protection Rated output voltage of 115% to 135%, automatic detection of automatic recovery
Start, rise time 230VAC full load 800ms, 20ms
Lez home franchise stores Copyright Do not copy
Insulation characteristics Between input and output: 3KVac, between input and housing: 1.5KVac, between output and housing: 0.5KVac, 1 minute
Operating temperature -20 ~ + 60 ℃ (reference temperature drop curve)
Anti - vibration 10 to 500 Hz, 2 G 10 min / cycle, XYZ each axis for 60 minutes
Safety certification Certified by UL60950-1, CB (IEC60950), CCC GB4943, and designed according to TUV EN60950-1
Electromagnetic compatibility standards Launch: EN55022 (CISPR22) class B, GB9254 CLASS B, Harmonics: EN61000-3-2,3
Electromagnetic Compatibility Standard Anti-interference: EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-1,Class A heavy industry standard
Mean time between failures ≥ 433,300 hours, MIL-HDBK-217F (25 ℃)
Wiring 7P / 9.5mm terminal block
Dimensions 199 × 98 × 38mm (length × width × height)
Shell number 902
Weight and packaging 0.7 kg, 20 per box / 15 kg, 0.02 cubic meters

■ Optional rail mounting method 1
■ Optional rail mounting method 2

Installation guidelines

model:
Shell type switching power supply

Description:
The housing power supply includes a metal housing and a plastic housing. The internal PCB is wrapped in a housing and is usually installed in a system cabinet. The plain power is divided into two different types depending on the rated power and design concept of the power supply: Cooling fan, the other is without a fan.

installation:







1. Before installing or performing maintenance work, disconnect the power supply from the application system and make sure that it does not automatically reconnect without notice!
2. Please attach the mounting screws to the internal components of the power supply to maintain a sufficient safe distance. Please refer to the package on the sample manual for the most suitable mounting screws. 'Buy the power supply for the use of Mingwei', please call 400 600 0430.
3. A non-standard installation direction or a power supply operating at high ambient temperatures can cause the temperature of the internal components of the power supply to rise and should be used in a load. Please install according to the optimum mounting direction of the specifications and determine the maximum power supply according to the temperature- Good work load.
4. Fans and vents must not be obstructed by anything. If there are other heat sources nearby, keep at least 10-15 cm
5. The recommended wire sizes are as follows
AWG 18 16 14 12 10 8
Rated current (A) 6A 6-10A 10-16A 16-25A 25-32A 32-40A
Wire cross-sectional area (mm square) 0.75 1.00 1.5 2.5 4 6
Note: The maximum surge current is only applicable to 1-4 core, 5 core surge current can not exceed the rated current of 80%
Ensure that all wires of the wire are in the terminal block and tighten the terminal screws to prevent poor contact.
6. Additional information about the product can be found on this website

Warning !!

1. To prevent electric shock and burn risk, all power supply faults should be checked by a qualified electrician.
2. Do not install the power supply in a humid environment or near water.
3. Do not expose the power supply to high temperature environments and near fire sources. Please refer to the specifications to determine the maximum ambient temperature for power applications.
4. The output voltage and output current can not exceed the rating range specified in the specification.
5. The ground wire (FG) must be connected to the ground. 'Buy the power supply for the use of Mingwei', please call 400 600 0430.
6. All Mingwei power supplies are designed according to EMC specifications, and we can provide test reports of the relevant power supply. Because the power supply is only a part of the application system, the EMC of the final system needs to be tested again when the power is integrated into the application system