Meanwell Switching Power Supply NES-100-9 101W 9V11.2A

Meanwell Switching Power Supply NES-100-9 101W 9V11.2A

Product description:

Product parameters:

  • Brand: MW / Meanwell
  • Model: NES-100-9
  • Modulation: Pulse width modulation
  • Connection: Full Bridge
  • Function: Power transformer

■ Optional accessories
■ Selection Points
1. The power supply output voltage must be equal to the load voltage. Voltage may burn your equipment does not match or can not start
2. The output power must be greater than the load power. Otherwise cause overload when the output current is greater than the current overload protection
3. The power supply output current must be greater than the load starting current (for motors and other inductive loads). Otherwise, you may trigger the overload protection start, can not boot
■ Introduction

A new generation of switching power supply, relatively old models Meanwell power, volume decreases, the overall performance upgrade, two-year warranty, lower prices, there is a safety certification (including China CCC) low power supply the best solution.

■ Main features
Switch to select AC input voltage range
Short circuit protection / overload / overvoltage protection
Through the International Security Certification UL / CB / CCC
By China National Safety certification CCC certification
Natural draft cooling
Shanghai Science and Technology Development Co., Ltd. hereby make music
Small size, high power density
Cost-effective, highly reliable
100% full load burn-in test
There are safety certified low power supply the best solution
Taiwan Ming Wei brand, the Guangzhou factory production
2-year warranty
■ The main parameters
DC output range 9V, 0 ~ 11.2A
Output voltage accuracy ±1%
Ripple 120mV
effectiveness 81%
Input voltage range Selected by a switch 85 ~ 132VAC / 170 ~ 264VAC or 248 ~ 373VDC
Input surge current Cold Start 230V 36A when
Voltage adjustment range -5% Of the rated output voltage to + 10%
Overload Overcurrent automatic recovery point at 110% ~ 150%, automatic detection
Overvoltage protection 115% to 135% of the rated output voltage, automatically detect automatic recovery
Start, the rise time 230VAC full 500ms, 20ms
House music hereby franchise stores All rights reserved Do not copy
Insulating properties Between the input and output side: between 1.5KVac, output terminal and housing:: 3KVac, between the input terminal and housing 0.5KVac, 1 Fenzhong
Operating temperature -20 ~ + 60 ℃ (Reference temperature derating curve)
Vibration resistance 10 ~ 500Hz, 2G 10 min / cycle, XYZ axes each 60 minutes
Safety certification By UL60950-1, CB (IEC60950), CCC GB4943 certification, and in accordance with TUV EN60950-1 Design
Electromagnetic Compatibility Emission: EN55022 (CISPR22) class B, GB9254 CLASS B, harmonics: EN61000-3-2,3
Electromagnetic Compatibility Interference: EN61000-4-2,3,4,5,6,8,11,, GB9254, EN55024, EN61000-6-1, A-level standard of light industry
MTBF ≥32.07 ten thousand hours, MIL-HDBK-217F (25 ℃)
Wiring 7P / 9.5mm terminal block
Dimensions 159 × 97 × 38mm (length × width × height)
Chassis number 901
Weight and packaging 0.55 kg, carton 30 /17.5 kg, 0.0275 m3

■ Optional rail mounting 1
■ Optional rail mounting 2

Installation Guide

Shell-type switching power supply

Shell type power supply includes metal and plastic models, the internal PCB board by the housing parcels, usually installed in the system cabinet Meanwell power supply according to the rated power supply design and is divided into two different types: one is built cooling fan, the other is not a fan of the band.


1. Before installation or maintenance work, disconnect the power supply and application system to ensure that does not automatically reconnect without notice!
2. Please install the screw and internal components of the power supply to maintain adequate safe distance. Refer to Figure Catalog Manual shell on the most appropriate mounting screws. [Have fun with buying power Meanwell], have questions, please call 4006000430.
3. Non-standard mounting direction or at high ambient temperature of the power supply will cause the temperature inside the device increases should derating use, install according to the specifications optimal mounting direction, and the temperature - the power to determine the best load curve good workload.
4. Fans and vents can not stop something, if there are other heat sources near, you should at least kept their distance 10-15cm
5. It follows the recommended wire size Wiring
AWG 18 16 14 12 10 8
Rated Current (A) 6A 6-10A 10-16A 16-25A 25-32A 32-40A
Wire cross-sectional area (mm square) 0.75 1.00 1.5 2.5 4 6
Note: the maximum surge current is only available for 1-4 wire, 5-pin inrush current can not exceed more than 80% of the rated current
Ensure that all core wires in the terminal block and tighten the terminal screws to prevent poor contact.
6. Additional information about the product please refer to this website

Warning !!

1. To prevent the risk of electric shock and burns, all the power is faulty by a qualified electrician engineer checking the unauthorized removal of the power supply housing.
2. Power can not be installed in a humid environment and near water.
3. Power can not be exposed to high temperatures and near fire place, please refer to the specification to determine the maximum ambient temperature of the power supply applications.
4. Output voltage and output current can not exceed the specifications required by the rating range.
5. Ground (FG) must be connected to the earth. [Buy Power hereby fun with Meanwell], have questions, please call 4006000430.
6. All Meanwell power supplies are EMC-compliant design, upon request we can provide power test i report because the power just is a component application system when power is integrated into the application, the final system EMC also need to be tested again to confirm