- Brand: NJ
- Model: JZC-B2
- Product Number: JZC-B2
- Color Classification: Ordinary without magnetic (at least 5 send saber) magnetic type magnetic tape (at least 5 send saber)
- Renovation and construction content: Installation Engineering
1Minute-8Minute (0.5Scale), 10%, 12%, 15%, 18%, 20%
250 * 125.8 * 25.1mm
- Civil Engineering (wall construction, ditch dam engineering, pipeline construction and other works);
- Architectural Engineering;
- Interior decoration works;
- It must involve other relevant slope, the inclination angle of the project.
For determination of the slope of the inclined surface (angle):
- Contact measuring instrument with the object to be measured.
- Scale rotary knob until the vial bubble to the center.
- Read pointer tip is aligned on the dial numbers
Up, down measure
When construction projects need to measure the slope gradient: Use the measuring instrument bDetermination of surface (if required angle using the measuring surfacea) .
Can be used in two ways: Determination of the set slope.
Instruments subject toA B S Engineering plastics, easy to operate and simple.
High strength, and simple vial (double importance of the ring).
Large digital dial, easy reading.
And with a slope angle table.
Need to set the slope (angle) when:
- Rotating the knob so that the pointer is aligned set the slope (angle) of the scale.
- The measurement surface in contact with the measuring instrument is set object, moving object is set, until the bubble vial centered so far.