Network Power Meter | Network Tester | Line Measuring Instrument | Transmit Battery WNS-468

Network Power Meter | Network Tester | Line Measuring Instrument | Transmit Battery WNS-468
 

Product description:

Product parameters:

  • Brand: Wynn 's / Power Lion
  • Model: WNS-468
  • Item No .: WNS-468
  • Decoration and construction content: installation works


'product description'
◆ First, the function
1, pairs of twisted-pair 1.2.3.4.5.6.7.8.G by (on) test, and can distinguish between the identification of which (on) the wrong line, short circuit and open circuit
2, WNS-468 measured RJ11, RJ45
◆ twisted pair test: turn on the power to the ON (S for the slow test file, M for the manual transmission) will plug the network cable
Into the main tester and remote test side host lights from 1 to G one by one flashing, the following diagram:
Main tester: 1-2-3-4-5-6-7-8-G
Remote Test Terminal: 1-2-3-4-5-6-7-8-G --- (RJ45)
1-2-3-4-5-6 ---- (RJ12)
-2-3-4-5 ------- (RJ11)
If the wiring is not normal, according to the following conditions:
1, when there is a network cable, such as line 3, the main test instrument and the remote test-side lighting on the 3rd does not shine
2, when there are a few unreasonable, then a few lines of lights are not bright, when the line is less than two lines Unicom is, the lights are not bright
3, when the two lines out of sequence, out of line 2, 4 lines, then the display is as follows:
The main tester remains unchanged: 1-2-3-4-5-6-7-8-G
The remote test end is: 1-4-3-2-5-6-7-8-G
4, when the cable has two short-circuit, the main tester shows the same, while the remote test-side display short-circuit of the two line number lights
Are micro-bright, if more than 3 (including 3) short-circuit, then all the short-circuit of several lines of lights are not bright
◆ Third, if the side of the patch panel and wall module, you need to match two jumpers (such as 110R4-RJ45) lead to the tester