Fluke Multimeter FLUKE18B + Digital Multimeter F18B + Fluke Digital Multimeter | Multimeter

Fluke Multimeter FLUKE18B + Digital Multimeter F18B + Fluke Digital Multimeter | Multimeter
 

Product description:

Product parameters:

  • Item: FLUKE18B
  • Decoration and construction content: installation works
  • Work: digital display
  • Accuracy: three and a half
  • Brand: FLUKE / Fluke
  • Model: Fluke18B


Ideal for working tools Fluke 18B + Fluke always offers you superior quality.

Use the 18B + multimeter to check and test most electronics issues. The meter is easy to use and has a significant improvement over the original Fluke 18B.It is suitable for anyone who is engaged in electronic maintenance and manufacturing setups. Whether you always want to have a The Fluke 18B + is the answer to your needs, whether you're looking for a Fluke digital multimeter or just looking for an upgrade.

  • 600 V Cat III Safety Design Specifications
  • The display range is 50% larger and the backlight is bright white
  • Intelligent LED Test Lights the LED (regardless of polarity), allowing you to test the LEDs in two modes:
    • DMM LED socket test mode
    • LED test mode on UUT (PCBA) (using test leads)
  • Voltage, resistance, current, capacitance
  • Diode test, data retention
  • Frequency and duty cycle
  • The AC and DC current measurements at the input terminals are 10A



Precision specifications

The calibration is maintained for 1 year with an operating temperature of 18 ° C to 28 ° C and a relative humidity of 0% to 75%. The accuracy specifications are as follows: ± ((readings%) + (Least Significant Digits)).
Features Range Resolution Precision
AC voltage
(40 Hz to 500 Hz)1
4.000 V
40.00 V
400.0 V
1000 V


0.001 V
0.01 V
0.1 V
1 V


1.0 % + 3
DC voltage 4.000 V
40.00 V
400.0 V
1000 V


0.001 V
0.01 V
0.1 V
1 V


0.5 % + 3
AC Voltage (mV) 400.0 mV 0.1 mV 3.0 % + 3
DC Voltage (mV) 400.0 mV 0.1 mV 1.0 % + 10
Diode test2 2.000 V 0.001 V 10%
resistance
(ohm)
400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ




0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ




0.5 % + 3
0.5 % + 2
0.5 % + 2
0.5 % + 2
0.5 % + 2
1.5% + 3




capacitance3 40.00 nF
400.0 nF
4.000 μF
40.00 μF
400.0 μF
1000 μF




0.01 nF
0.1 nF
0.001 μF
0.01 μF
0.1 μF
1 μF




2 % + 5
2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5




frequency1
Hz
(10 Hz to 100 kHz)

50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz



0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz



0.1 % + 3
Duty cycle1 1% to 99% 0.1 % Typical Case 4
AC current μA
(40 Hz to 400 Hz)
400.0 μA
4000 μA
0.1 μA
1 μA
1.5 % + 3
Alternating current
(40 Hz to 400 Hz)
40.00 mA
400.0 mA
0.01 mA
0.1 mA
1.5 % + 3
Alternating current
(40 Hz to 400 Hz)
4.000 A
10.00 A
0.001 A
0.01 A
1.5 % + 3
DC current μA 400.0 μA
4000 μA
0.1 μA
1 μA
1.5 % + 3
Direct current 40.00 mA
400.0 mA
0.01 mA
0.1 mA
1.5 % + 3
Direct current 4.000 A
10.00 A
0.001 A
0.01 A
1.5 % + 3
1All current, frequency, and duty cycles are in the range of 1% to 100% of range. No input value below 1% of range is specified.
2Typically, the open-circuit test voltage is 2.0 V, short-circuit current <0.6 mA.
3Specifications do not include test lead capacitance and capacitive plate-induced errors (up to 1.5 nF at 40 nF).
4This usually means a frequency of 50 Hz or 60 Hz and a duty cycle of between 10% and 90%.