[Electronic and Electrical] - [Instrumentation]

Fluke Fluke 117C compact true rms digital multimeter

Product code: -11101100030
Unit price 237.1$
Sold quantity 103
Available stock 3
Expired or Cancelled

Product parameters:

  • Item No .: 2538859
  • Decoration and construction content: hydropower projects
  • Work: digital display
  • Accuracy: three and a half
  • Brand: FLUKE / Fluke
  • Model: Fluke 117C compact true rms digital multimeter

Designed for electrical technicians

Fluke 117C compact true rms digital multimeter
Designed for use by electrical technicians and manufactured by Fluke Corporation Compact True RMS Meter for Commercial Use The Fluke 117C is ideal for use in demanding environments in commercial buildings, hospitals and schools. The Fluke 117C includes an integrated Non-contact voltage detection, can help to complete the measurement work more quickly
  • With VoltAlert ™ technology for non-contact voltage detection
  • For measuring microamps of flame sensors
  • LoZ Function: Low input impedance to prevent false readings due to false voltage
  • White LED backlighting is effective even in low-light locations
  • True RMS, accurate measurement of non-linear load
  • Can measure 20 A (30 seconds instantaneous; 10 A continuous)
  • Resistance, continuity, frequency and capacitance measurements
  • Minimum / maximum / average measurement function, recording signal fluctuations
  • Compact ergonomic design, suitable for single-handed operation
  • An optional magnetic meter can be used with the ToolPak ™, which can be measured without holding it
  • Safety class CAT III 600 V
  • Flow 'class 'Speaking
    Special Concepts: The difference between an average response multimeter and a true RMS multimeter
    Explanation: The average response multimeter in the measurement of AC signal is the average multiplied by the form factor calibration into RMS, and true RMS measurement of AC signal is the rms algorithm, mostly for pure sine wave, whether it is true RMS Or the average response of the instrument can accurately measure, but for the distortion waveform, or the typical non-selective such as square wave, triangle wave, sawtooth wave, only true RMS meter can accurately measure
    Technical specifications
    1) All AC ranges are specified in the range of 1% to 100% of the range, except for the Auto-V LoZ measurement. Auto-V LoZ is specified to be 0 V. Since low In the range of 1% of the input voltage, so when the test line disconnect from the circuit, or two test lines connected together and a short circuit occurs, the instrument or other true RMS meter shows non-zero reading is normal for the voltage For measurements, the peak coefficient is ≤ 3 at 4000 bits and linearly down to 1.5 at full scale. The AC voltage is AC-coupled. The automatic voltage LoZ and the AC mV are DC-coupled.
    2) Temperature error (accuracy) does not include thermocouple probe error.
    3) The frequency is AC-coupled, for AC voltage, the frequency is 45 Hz to 50 kHz.

    Simple instructions