- Brand: CONNER / Kanai
- Model: mousse doll series
- Material: Sticker
- Color Classification: mousse - I am a novice mousse - novice driving NO mousse - Novice Do not rush me thanking you -baby in car mousse mousse - see Freeze note the distance between vehicles mousse - stop waving only guy mousse mousse -money money - no smoking car stickers mousse -mocmoc handle (4) rabbit mousse -YOYO mocmoc (pair) mousse - doll mocmoc rearview mirror stickers (pair) mousse - tank stickers white mousse - tank stickers black mousse - non-smoking area to eat goods rabbits dancing woman left a rear-end collision on Jiashui who mousse - the slower the reminder reminder again stall mousse from the United States - with her husband without car loan
- Foil type: Body stickers
Small car stickers transparent transfer film installation method (dry paste method):
1. Clean body, keep dry.
2. Determine the need to paste a good position. Under normal circumstances, the side stick slowly, while tools evenness, while Jiedi paper.
3. If the graphics really do not, but also the transparent transfer film and the sticker tear paste, but must be careful not an accident adhesion.
4. posted good, and then repeated scraping pressure several times, off the transparent transfer film.
5. In the doors and sewn with a knife draw knife, inward package fit perfectly.
6 Do not let the car stickers and body of any separation or protrusions
Two large car with a transparent transfer film attached installation method (wet paste method):
Tools: Towels watering utensils scraper or credit card
1. Clean the body, the body will be posted on the site and are watering - to reduce the sticker difficulty, easy to adjust the position.
2. Determine the need to paste a good position, the side stick slowly while gently tools evenness, while Jiedi paper.
3. The door handles or anti-rub encounters according to the circumstances of the material cut into Bing package.
4. Appropriate adjustments will determine the correct location of the graphics in general, the force repeatedly scrape the water and bubbles, off the transparent transfer film.
5. sewn in the door and draw knife, inward package fit perfectly with a knife
6. Do not let the car stickers and body of any separation or protrusions.
7. try to make car stickers in the water dry, dry conditions can be moderately heated, depending on weather conditions, and then washing a day or two later.
How to remove:
Gently blowing sticker edges with a nail, and then tear off the entire winter if the cold weather can not be swept corner, hair dryer available appropriate heating the stickers can be easily removed after the glue melting soft.
1. In decision not to dress up your car before waxing one week, the wax will stick is not strong stickers, car stickers do not stick well after washing three days, rainy days, not glued, so the effect will be bad Oh!
2. The need to stick stickers on the door or other activities where it is needed, do not worry, after a good stick with a sharp knife to cut open.
3. The reflective material non-self-luminous, reflective at night to light exposure time will reflect light, flashy and can serve as a warning